exjobb-public/src/socbridge_driver.vhd

library IEEE;
use IEEE.std_logic_1164.all;
library work;
use work.io_types.all;


entity socbridge_driver is
  port(
    clk     : in std_logic;
    rst   : in std_logic;
    ext_in  : in ext_socbridge_in_t;
    ext_out : out ext_socbridge_out_t;
    int_in  : out int_socbridge_in_t;
    int_out : in int_socbridge_out_t
  );
end entity socbridge_driver;

architecture rtl of socbridge_driver is
  pure function calc_parity(
    d : STD_LOGIC_VECTOR(interface_inst.socbridge.payload_width - 1 downto 0)
  ) return std_logic is
  variable parity : std_logic;
  begin
    parity := d(0);
    for x in 1 to d'length - 1 loop
      parity := parity xor d(x);
    end loop;
    return not parity;
  end function;
  
  signal ext_d_in, ext_d_out,ext_d_in_reg, ext_d_out_reg : std_logic_vector(interface_inst.socbridge.payload_width - 1 downto 0);
  signal ext_clk_in, ext_clk_out, ext_parity_in, ext_parity_out, ext_next_parity_out : std_logic;


  type command_t is 
    (NO_OP, WRITE_ADD, WRITE, READ_ADD, READ, P_ERR);

  type response_t is 
    (NO_OP, WRITE_ACK, READ_RESPONSE);

  type state_t is
    (RESET, IDLE, TX_HEADER, TX_BODY, TX_ACK, RX_HEADER, RX_RESPONSE, RX_BODY);

  signal curr_state, next_state : state_t;
  signal curr_command : command_t;
  signal curr_command_bits : std_logic_vector(4 downto 0);
  signal curr_respoonse : response_t;
  signal curr_response_bits : std_logic_vector(4 downto 0);
begin
  comb_proc: process(ext_in, int_out, ext_d_out_reg, ext_clk_out, ext_parity_out, curr_state)
  begin
    ext_next_parity_out <= calc_parity(int_out.payload);
    ext_out.payload <= ext_d_out_reg;
    ext_out.control <= ext_clk_out & ext_parity_out;
    ext_d_in <= ext_in.payload;
    ext_parity_in <= ext_in.control(0);
    ext_clk_in <= ext_in.control(1);
    curr_response_bits <= ext_d_in(7 downto 3);
    -- Create combinational bindings for command/response types
    with curr_command select
      curr_command_bits <= "00000" when NO_OP,
                           "10000" when WRITE_ADD,
                           "10100" when WRITE,
                           "11000" when READ_ADD,
                           "11100" when READ,
                           "01001" when P_ERR,      
                           "11111" when others;   
    with curr_response_bits select
      curr_respoonse <= WRITE_ACK when "00001",
                        WRITE_ACK when "00101",
                        READ_RESPONSE when "01000",
                        READ_RESPONSE when "01100",
                        NO_OP when others;

    --- State Transition Diagram ---
--                                                            
--            +-----+                                         
--           \|/    |                                         
--          RESET --+                                         
--            |                                               
--            |                                               
--          IDLE<-------------------+                 
--          /  \                    |                            
--         /     \                  |                            
--        /       \                 |                            
--      \|/       \|/               |                         
--  TX_HEADER   RX_HEADER           |                        
--       |           |              |                           
--       |           |     ----+    |                           
--      \|/         \|/   \|/  |    |                           
--   TX_BODY     RX_RESPONSE---+    |                           
--       |           |              |                           
--       |  +--+     |              |                           
--      \|/\|/ |    \|/             |                           
--     TX_ACK--+ RX_BODY            |                           
--       |           |              |                           
--       |           |              |                           
--       +-----------+--------------+                 
--                                                            
    case curr_state is
      when IDLE => 
        if curr_command = WRITE or curr_command = WRITE_ADD then
          next_state <= TX_HEADER;
        elsif curr_command = READ or curr_command = READ_ADD then
          next_state <= RX_HEADER;
        else
          next_state <= IDLE;
        end if;
      when RESET =>
        next_state <= IDLE;
      when TX_HEADER =>
      -- The header only takes one word (cycle) to transmit.
      -- Continue to body directly afterwards. 
        next_state <= TX_BODY;
      when TX_BODY =>
      -- Here we want to stay in TX_BODY for the duration of a packet.
      -- Right now, we transfer one single word at a time for simplicity
        next_state <= TX_ACK;
      when TX_ACK =>
      -- Wait for write acknowledgement. 
        if curr_respoonse = WRITE_ACK then
          next_state <= IDLE;
        else 
          next_state <= TX_ACK;
        end if;
      when RX_HEADER =>
      -- The header only takes one word (cycle) to transmit.
      -- Continue to awaiting response directly afterwards.
        next_state <= RX_RESPONSE;
      when RX_RESPONSE =>
      -- Wait for read response. 
        if curr_respoonse = READ_RESPONSE then
          next_state <= RX_BODY;
        else 
          next_state <= RX_RESPONSE;
        end if;
      when RX_BODY =>
      -- Here we want to stay in RX_BODY for the duration of a packet.
      -- Right now, we receive only one single word at a time for simplicity
        next_state <= IDLE;
    end case;
  
  end process comb_proc;
  -- Process updating internal registers based on primary clock
  seq_proc: process(ext_clk_in, rst)
  begin
    if(rst = '1') then
      ext_d_in_reg <= (others => '0');
      ext_d_out_reg <= (others => '0');
      ext_clk_out <= '0';
      ext_parity_out <= '1';
      curr_state <= IDLE;

    elsif(rising_edge(ext_clk_in)) then
      ext_clk_out <= not ext_clk_out;
      ext_d_in_reg <= ext_d_in;
      ext_d_out_reg <= int_out.payload;
      ext_parity_out <= ext_next_parity_out; 
      curr_state <= next_state;
    end if; 
  end process seq_proc;



end architecture rtl;