added dashed lines to throughput results

Reviewed-on: #19

.gitignore

@@ -1,2 +1,4 @@
 **/wave
 **/work
+**/syn
+scripts/ghdl

plots/shyloc_results.py

@@ -0,0 +1,37 @@
+import matplotlib.pyplot as plt
+import numpy as np
+
+text_size = 30
+stroke = 2
+marker_width = 8
+packet_sizes = (4,8,16,32,64,128)
+configs = {
+    'Single Issue'                  : (0.4239, 0.4380, 0.4377, 0.4368, 0.4350, 0.4313),
+    'Performance Optimized'         : (0.4228, 0.4379, 0.4378, 0.4371, 0.4353, 0.4292),
+    'Resource Utilization Optimized': (0.4239, 0.4380, 0.4385, 0.4371, 0.4353, 0.4293),
+}
+
+x = np.arange(len(packet_sizes))  # the label locations
+ys = np.arange(0,1,2**-5)
+width = 0.25  # the width of the bars
+multiplier = 0
+
+fig, ax = plt.subplots(layout='constrained')
+
+for attribute, measurement in configs.items():
+    offset = width * multiplier
+    rects = ax.bar(x + offset, measurement, width, label=attribute)
+    ##ax.bar_label(rects, padding=15+multiplier*40,fontsize=text_size)
+    multiplier += 1
+
+plt.plot([-0.125,5.625],[0.4419,0.4419],lw=stroke, label="Ideal")
+# Add some text for labels, title and custom x-axis tick labels, etc.
+ax.set_ylabel('Throughput (B/C)',fontsize=text_size)
+ax.set_xlabel('Packet Size (B/P)',fontsize=text_size)
+ax.set_title('Throughput during SHyLoC compression (1904B uncompressed, 1664B compressed)',fontsize=text_size)
+ax.set_xticks(x + width, packet_sizes,fontsize=text_size)
+ax.set_yticks(ys, ys,fontsize=text_size)
+ax.legend(loc='upper left', ncols=2,fontsize=text_size)
+ax.set_ylim(0.4, 0.47)
+
+plt.show()

plots/synth_results.py

@@ -0,0 +1,67 @@
+import matplotlib.pyplot as plt
+import numpy as np
+
+## Bar diagram chunked on different parameters.
+text_size = 30
+stroke = 2
+marker_width = 8
+metrics = ("LUTs", "DFFs", "Carry", "Memory Blocks")
+configs = {
+    'Single Issue': (2.68, 1.61, 1.69, 3.57),
+    'IO Pipelined': (3.68, 1.84, 3.02, 3.57),
+    'Minimized IO Pipelined': (2.84, 1.62, 1.45, 3.57),
+}
+
+x = np.arange(len(metrics))  # the label locations
+ys = np.arange(0,10,1)
+width = 0.25  # the width of the bars
+multiplier = 0
+
+fig, ax = plt.subplots(layout='constrained')
+
+for attribute, measurement in configs.items():
+    offset = width * multiplier
+    rects = ax.bar(x + offset, measurement, width, label=attribute)
+    ax.bar_label(rects, padding=3,fontsize=text_size)
+    #ax.bar_label(rects, padding=3)
+    multiplier += 1
+
+# Add some text for labels, title and custom x-axis tick labels, etc.
+ax.set_ylabel('Utilization (%)',fontsize=text_size)
+ax.set_xlabel('Metric',fontsize=text_size)
+ax.set_title('Resource Utilization of GANIMEDE versions',fontsize=text_size)
+ax.set_xticks(x + width, metrics,fontsize=text_size)
+ax.set_yticks(ys, ys,fontsize=text_size)
+ax.legend(loc='upper left', ncols=3,fontsize=text_size)
+ax.set_ylim(0, 10)
+
+plt.show()
+
+##metrics = ("LUTs", "DFFs", "Carry", "Memory Blocks")
+##configs = {
+##    'Single Issue': (874, 496, 130, 2),
+##    'IO Pipelined': (1200, 565, 232, 2),
+##    'Minimized IO Pipelined': (926, 499, 111, 2),
+##}
+##
+##x = np.arange(len(metrics))  # the label locations
+##width = 0.25  # the width of the bars
+##multiplier = 0
+##
+##fig, ax = plt.subplots(layout='constrained')
+##
+##for attribute, measurement in configs.items():
+##    offset = width * multiplier
+##    rects = ax.bar(x + offset, measurement, width, label=attribute)
+##    ax.bar_label(rects, padding=3)
+##    multiplier += 1
+##
+### Add some text for labels, title and custom x-axis tick labels, etc.
+##ax.set_ylabel('Utilization (%)')
+##ax.set_title('configs attributes by metrics')
+##ax.set_xticks(x + width, metrics)
+##ax.legend(loc='upper left', ncols=3)
+##ax.set_ylim(0, 1500)
+##
+##plt.show()
+##

plots/throughput_results.py

@@ -0,0 +1,42 @@
+import matplotlib.pyplot as plt
+import numpy as np
+
+## Bar diagram chunked on different parameters.
+text_size = 30
+stroke = 4
+marker_width = 8
+packet_sizes = (4,8,16,32,64,128)
+configs = {
+    'Single Issue'                  : ('X',marker_width,  stroke,   False, (0.4414, 0.6095, 0.7529, 0.8312, 0.8889, 0.9275)),
+    'Performance Optimized'         : ('s',marker_width+4,stroke,   False, (0.4211, 0.6957, 1.0323, 1.3333, 1.5799, 1.7527)),
+    'Resource Utilization Optimized': ('^',marker_width,  stroke,   True , (0.4211, 0.6957, 1.0323, 1.3333, 1.5799, 1.7527)),
+    'Ideal Addressed'               : ('o',marker_width,  stroke,   False, (0.5714, 0.8889, 1.2308, 1.5238, 1.7297, 1.8551)),
+    'Ideal non-Addressed'           : ('v',marker_width,  stroke,   False, (1.3333, 1.6000, 1.7778, 1.8824, 1.9394, 1.9692)),
+}
+
+
+x = np.arange(len(packet_sizes))  # the label locations
+ys = np.arange(0,2.25,0.25)
+width = 0.25  # the width of the bars
+multiplier = 0
+
+fig, ax = plt.subplots(layout='constrained')
+
+for attribute, (marker, lw, st, isDashed ,measurement) in configs.items():
+    if isDashed:
+        ax.plot(packet_sizes, measurement, label=attribute, marker=marker, dashes=[2,2], lw=st, mew=lw)
+    else:
+        ax.plot(packet_sizes, measurement, label=attribute, marker=marker, lw=st, mew=lw)
+
+# Add some text for labels, title and custom x-axis tick labels, etc.
+ax.set_ylabel('Throughput (B/C)',fontsize=text_size)
+ax.set_xlabel('Packet Size (B/P)',fontsize=text_size)
+ax.set_title('Unhindered Throughput of simultaneous 256KiB read and 256KiB write',fontsize=text_size)
+ax.set_xscale('log')
+ax.set_xticks(packet_sizes, packet_sizes,fontsize=text_size)
+ax.set_yticks(ys, ys,fontsize=text_size)
+ax.legend(loc='upper left', ncols=2,fontsize=text_size)
+ax.set_ylim(0.2, 2.7)
+
+plt.show()
+

scripts/ghdl

@@ -1,4 +0,0 @@
-#!/bin/bash
-VARS="$@"
-COMMAND="ghdl $VARS"
-docker run -it -v .:/src -w /src ghdl/ghdl:5.0.0-dev-gcc-ubuntu-24.04 bash -c "$COMMAND" 

scripts/source_and_run.sh

@@ -1,6 +0,0 @@
-#!/bin/bash
-
-source /gsl/cad/modules/init/bash
-
-module add /gsl/cad/modules/modulefiles/nanoxplore/nxdesignsuite/24.3.0.0
-nxpython $@

src/.gitignore

@@ -0,0 +1,2 @@
+**/grlib*/**
+eFPGA_socbridge

src/control_socbridge_merge/control_socbridge_tb.vhd

@@ -1,11 +1,11 @@
 library IEEE;
 use IEEE.std_logic_1164.all;
 use IEEE.NUMERIC_STD.all;
-library ganimede;
-use ganimede.io_types.all;
-library socbridge;
-use socbridge.socbridge_driver_tb_pkg.all;
-library controller;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
+library gan_socbridge;
+use gan_socbridge.socbridge_driver_pkg.all;
+library gan_controller;
 
 entity control_socbridge_tb is
 end entity control_socbridge_tb;
@@ -23,8 +23,8 @@ architecture tb of control_socbridge_tb is
     control => (others => '0')
   );
   signal socbridge_driver_to_ext    :  socbridge_driver_to_ext_t;
-  signal socbridge_driver_to_buffer :  socbridge_driver_to_buffer_t;
-  signal buffer_to_socbridge_driver :  buffer_to_socbridge_driver_t := (
+  signal socbridge_driver_to_ip :  socbridge_driver_to_ip_t;
+  signal ip_to_socbridge_driver :  ip_to_socbridge_driver_t := (
     payload => (others => '0'),
     write_enable_out => '0',
     is_full_in => '0'
@@ -35,9 +35,9 @@ architecture tb of control_socbridge_tb is
     seq_mem_access_count => 0,
     cmd => "00"
   );
-  signal socbridge_driver_to_controller: socbridge_driver_to_controller_t := (is_active => '0');
+  signal drivers_to_controller: drivers_to_controller_t := (socbridge => (is_active => '0'));
   signal controller_to_cpu: controller_to_cpu_t;
-  signal controller_to_socbridge_driver: controller_to_socbridge_driver_t;
+  signal controller_to_drivers: controller_to_drivers_t;
 
   signal curr_word : std_logic_vector(ext_to_socbridge_driver.payload'length - 1 downto 0);
   signal expected_out : std_logic_vector(socbridge_driver_to_ext.payload'length - 1 downto 0);
@@ -80,12 +80,12 @@ begin
     port map(
       clk                            => clk,
       rst                            => rst,
-      controller_to_socbridge_driver => controller_to_socbridge_driver,
-      socbridge_driver_to_controller => socbridge_driver_to_controller, 
+      controller_to_socbridge_driver => controller_to_drivers.socbridge,
+      socbridge_driver_to_controller => drivers_to_controller.socbridge, 
       ext_to_socbridge_driver        => ext_to_socbridge_driver,
       socbridge_driver_to_ext        => socbridge_driver_to_ext,
-      buffer_to_socbridge_driver     => buffer_to_socbridge_driver,
-      socbridge_driver_to_buffer     => socbridge_driver_to_buffer
+      ip_to_socbridge_driver         => ip_to_socbridge_driver,
+      socbridge_driver_to_ip         => socbridge_driver_to_ip
     );
 
   controller_unit_inst: entity controller.control_unit
@@ -94,8 +94,8 @@ begin
       rst                            => rst,
       cpu_to_controller              => cpu_to_controller,
       controller_to_cpu              => controller_to_cpu,
-      socbridge_driver_to_controller => socbridge_driver_to_controller,
-      controller_to_socbridge_driver => controller_to_socbridge_driver
+      drivers_to_controller          => drivers_to_controller,
+      controller_to_drivers          => controller_to_drivers
   );
   
   ext_to_socbridge_driver.control(1) <= clk;
@@ -121,21 +121,21 @@ begin
     rst <= '0';
     cpu_to_controller.address <= x"FA0FA0FA";
     cpu_to_controller.cmd <= "01";
-    wait until socbridge_driver_to_controller.is_active = '1';
+    wait until drivers_to_controller.socbridge.is_active = '1';
     report "Task received in driver, awaiting completion...";
     cpu_to_controller.address <= (others => '0');
     cpu_to_controller.cmd <= "00";
-    wait until socbridge_driver_to_controller.is_active = '0';
+    wait until drivers_to_controller.socbridge.is_active = '0';
     wait for CLK_PERIOD;
     report "Task completed in driver, sending next task...";
     cpu_to_controller.address <= x"FA0FA0FA";
     cpu_to_controller.cmd <= "10";
     wait for CLK_PERIOD;
-    wait until socbridge_driver_to_controller.is_active = '1';
+    wait until drivers_to_controller.socbridge.is_active = '1';
     report "Task received in driver, awaiting completion...";
     cpu_to_controller.address <= (others => '0');
     cpu_to_controller.cmd <= "00";
-    wait until socbridge_driver_to_controller.is_active = '0';
+    wait until drivers_to_controller.socbridge.is_active = '0';
     wait for CLK_PERIOD;
     report "Task completed in driver, ending simulation stimulus";
     cpu_to_controller.address <= (others => '0');
@@ -197,19 +197,19 @@ begin
   internal_stimulus: process
     variable input : positive := 1;
   begin
-    buffer_to_socbridge_driver.is_full_in <= '0';
-    buffer_to_socbridge_driver.write_enable_out <= '0';
+    ip_to_socbridge_driver.is_full_in <= '0';
+    ip_to_socbridge_driver.write_enable_out <= '0';
     wait for 3 * CLK_PERIOD;
     -- stimulus goes here
-    buffer_to_socbridge_driver.write_enable_out <= '1';
-    buffer_to_socbridge_driver.payload <= std_logic_vector(to_unsigned(input, buffer_to_socbridge_driver.payload'length));
+    ip_to_socbridge_driver.write_enable_out <= '1';
+    ip_to_socbridge_driver.payload <= std_logic_vector(to_unsigned(input, ip_to_socbridge_driver.payload'length));
     input := input + 1 mod 256;
-    wait until rising_edge(clk) and socbridge_driver_to_buffer.is_full_out = '0';
+    wait until rising_edge(clk) and socbridge_driver_to_ip.is_full_out = '0';
     wait until falling_edge(clk);
     for x in 0 to 1000 loop
-      buffer_to_socbridge_driver.payload <= std_logic_vector(to_unsigned(input, buffer_to_socbridge_driver.payload'length));
+      ip_to_socbridge_driver.payload <= std_logic_vector(to_unsigned(input, ip_to_socbridge_driver.payload'length));
       input := input + 1 mod 256;
-      wait until rising_edge(clk) and socbridge_driver_to_buffer.is_full_out = '0';
+      wait until rising_edge(clk) and socbridge_driver_to_ip.is_full_out = '0';
       wait until falling_edge(clk);
     end loop;
     wait;

src/controller/control_unit.vhd

@@ -1,17 +1,17 @@
 library IEEE;  
 use IEEE.std_logic_1164.all;
 use IEEE.MATH_REAL.all;
-library ganimede;
-use ganimede.io_types.all;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
 
 entity control_unit is
   
   port (
-    clk, rst        : in  std_logic;
-    cpu_to_controller  : in  cpu_to_controller_t;
-    controller_to_cpu : out controller_to_cpu_t;
-    socbridge_driver_to_controller  : in  socbridge_driver_to_controller_t;
-    controller_to_socbridge_driver : out controller_to_socbridge_driver_t
+    clk, rst              : in  std_logic;
+    manager_to_controller     : in  manager_to_controller_t;
+    controller_to_manager     : out controller_to_manager_t;
+    drivers_to_controller : in  drivers_to_controller_t;
+    controller_to_drivers : out controller_to_drivers_t
   );
 
 end entity control_unit;
@@ -26,49 +26,65 @@ architecture behave of control_unit is
   end record state_t;
 
   signal state: state_t;
-  shared variable ored: std_logic;
+  signal ored_reading: std_logic;
+  signal ored_writing: std_logic;
   
 
 begin
 
-  comb_proc: process(cpu_to_controller, socbridge_driver_to_controller, state)
+  comb_proc: process(manager_to_controller, drivers_to_controller, state)
+    variable local_ored_reading : std_logic;
+    variable local_ored_writing : std_logic;
   begin
-    ored := '0';
+    local_ored_reading := '0';
+    local_ored_writing := '0';
     ready_reduction: for i in 0 to number_of_drivers - 1 loop
-      ored := ored or socbridge_driver_to_controller.is_active;
+      local_ored_reading := local_ored_reading or drivers_to_controller.socbridge.is_reading;
+      local_ored_writing := local_ored_writing or drivers_to_controller.socbridge.is_writing;
     end loop ready_reduction;
-    controller_to_socbridge_driver.request <= state.curr_driver;
-    controller_to_socbridge_driver.address <= state.address;
-    controller_to_socbridge_driver.seq_mem_access_count <= state.seq_mem_access_count;        
-    controller_to_cpu.ready <= state.ready;
-    controller_to_socbridge_driver.instruction <= state.instruction;
+    ored_reading <= local_ored_reading;
+    ored_writing <= local_ored_writing;
+    controller_to_drivers.socbridge.request <= state.curr_driver;
+    controller_to_drivers.socbridge.address <= state.address;
+    controller_to_drivers.socbridge.seq_mem_access_count <= state.seq_mem_access_count;        
+    controller_to_manager.ready <= state.ready;
+    controller_to_drivers.socbridge.instruction <= state.instruction;
   end process comb_proc;
 
   sync_proc: process(clk, state)
   begin
     if rising_edge(clk) then
       if rst = '1' then
-        state <= ((others => '0'), 
-                  0, 
-                  '0',
-                  '1',
-                  NO_OP);
+          state.address <= (others => '0'); 
+          state.seq_mem_access_count <= 0; 
+          state.curr_driver <= '0';
+          state.ready <= '1';
+          state.instruction <= NO_OP;
       else
-        state.ready <= not ored;
-        if ored = '0' then
-          state.address <= cpu_to_controller.address;
-          state.seq_mem_access_count <= cpu_to_controller.seq_mem_access_count;
-          state.curr_driver <= cpu_to_controller.driver_id(0);
-          with cpu_to_controller.cmd select
-            state.instruction <= WRITE when "01",
-                                 READ  when "10",
-                                 NO_OP when others;
+        -- Make sure to tell the management unit instruction is done
+        if (ored_writing = '0' and ored_reading = '0') and state.ready = '0' then
+          state.ready <= '1';
         else
-          state <= ((others => '0'), 
-                    0, 
-                    '0',
-                    '1',
-                    NO_OP);
+        end if;
+        controller_to_manager.done_reading <= ored_reading;
+        controller_to_manager.done_writing <= ored_writing;
+        if ored_reading = '0' or ored_writing = '0' then
+          state.address <= manager_to_controller.address;
+          state.seq_mem_access_count <= manager_to_controller.seq_mem_access_count;
+          state.curr_driver <= manager_to_controller.driver_id(0);
+          if manager_to_controller.cmd = "01" then
+            state.instruction <= WRITE;
+          elsif manager_to_controller.cmd = "10" then
+            state.instruction <= READ;
+          else
+            state.instruction <= NO_OP;
+          end if;
+        else
+          state.address <= (others => '0'); 
+          state.seq_mem_access_count <= 0; 
+          state.curr_driver <= '0';
+          state.ready <= '1';
+          state.instruction <= NO_OP;
         end if;
       end if;
     end if;

src/controller/control_unit_tb.vhd

@@ -2,9 +2,9 @@ library IEEE;
 use IEEE.std_logic_1164.all;
 use IEEE.MATH_REAL.all;
 use IEEE.numeric_std.all;
-library ganimede;
-use ganimede.io_types.all;
-library controller;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
+library gan_controller;
 
 entity control_unit_tb is
 end entity control_unit_tb;
@@ -14,14 +14,14 @@ architecture tb of control_unit_tb is
   constant cycle: Time := 10 ns;
   signal clock: std_logic := '0';
   signal reset: std_logic := '0';
-  signal cpu_to_controller: cpu_to_controller_t := (
+  signal manager_to_controller: manager_to_controller_t := (
                                               (others => '0'),
                                               (others => '0'),
                                               0,
                                               "00");
-  signal socbridge_driver_to_controller: socbridge_driver_to_controller_t := (is_active => '0');
-  signal controller_to_cpu: controller_to_cpu_t;
-  signal controller_to_socbridge_driver: controller_to_socbridge_driver_t;
+  signal drivers_to_controller: drivers_to_controller_t := (socbridge => (is_active => '0'));
+  signal controller_to_manager: controller_to_manager_t;
+  signal controller_to_drivers: controller_to_drivers_t;
   signal current_driver : std_logic_vector(0 downto 0) := "0";
   shared variable word_counter: natural := 0;
 
@@ -36,25 +36,25 @@ begin
   wait;
   end process clock_proc;
 
-  control_unit_inst: entity controller.control_unit
+  control_unit_inst: entity gan_controller.control_unit
     port map(
     clk             => clock,
     rst             => reset,
-    cpu_to_controller  => cpu_to_controller,
-    controller_to_cpu => controller_to_cpu,
-    socbridge_driver_to_controller  => socbridge_driver_to_controller,
-    controller_to_socbridge_driver => controller_to_socbridge_driver
+    manager_to_controller  => manager_to_controller,
+    controller_to_manager => controller_to_manager,
+    drivers_to_controller => drivers_to_controller,
+    controller_to_drivers => controller_to_drivers
     );
 
 stimulus_proc: process
 begin
   wait for cycle;
 
-  cpu_to_controller.driver_id <= "1";
-  socbridge_driver_to_controller.is_active <= '0';
-  cpu_to_controller.address <= x"F0F0F0F0";
-  cpu_to_controller.seq_mem_access_count <= 3;
-  cpu_to_controller.cmd <= "01";
+  manager_to_controller.driver_id <= "1";
+  drivers_to_controller.socbridge.is_active <= '0';
+  manager_to_controller.address <= x"F0F0F0F0";
+  manager_to_controller.seq_mem_access_count <= 3;
+  manager_to_controller.cmd <= "01";
   word_counter := 3;
   wait for cycle;
   current_driver <= "1";
@@ -65,7 +65,7 @@ begin
     report "words remaining are " & integer'image(i);
   end loop for_loop;
   
-  socbridge_driver_to_controller.is_active <= '0';
+  drivers_to_controller.socbridge.is_active <= '0';
   report "Stim process done";
   wait;
 end process stimulus_proc; 
@@ -76,9 +76,9 @@ begin
   wait for cycle;
 
   wait for cycle;
-  assert controller_to_socbridge_driver.request = '1' report "Incorrect driver_id from control_unit" severity error;
-  assert controller_to_socbridge_driver.address = x"F0F0F0F0" report "Incorrect address from control_unit" severity error;
-  assert controller_to_socbridge_driver.instruction = WRITE report "Incorrect memory op from control_unit" severity error;
+  assert controller_to_drivers.socbridge.request = '1' report "Incorrect driver_id from control_unit" severity error;
+  assert controller_to_drivers.socbridge.address = x"F0F0F0F0" report "Incorrect address from control_unit" severity error;
+  assert controller_to_drivers.socbridge.instruction = WRITE report "Incorrect memory op from control_unit" severity error;
 
   wait for 5 * cycle;
   reset <= '1';

src/dummy_ip/dummy_ip.vhd

@@ -0,0 +1,40 @@
+library IEEE;
+use IEEE.std_logic_1164.all;
+use IEEE.NUMERIC_STD.all;
+
+entity dummy_ip is
+  port (
+    clk, rst : in std_logic;
+    ready_in, valid_in : in std_logic;
+    ready_out, valid_out : out std_logic;
+    data_in : in std_logic_vector(8 - 1 downto 0);
+    data_out : out std_logic_vector(8 - 1 downto 0)
+  );
+end entity dummy_ip;
+
+architecture rtl of dummy_ip is
+  signal incremented_in : std_logic_vector(8 - 1 downto 0);
+begin
+ 
+comb_proc: process(ready_in, valid_in, data_in, incremented_in)
+begin
+  ready_out <= ready_in;
+end process;
+
+seq_proc: process(clk,rst)
+begin
+  if rst = '1' then
+    valid_out <= '0';
+    data_out <= (others => '0');
+  elsif rising_edge(clk) then
+    if valid_in = '1' and ready_in = '1' then 
+      valid_out <= '1';
+      data_out <= std_logic_vector(unsigned(data_in) + 1);    
+    else
+      valid_out <= '0';
+    end if; 
+  elsif falling_edge(clk) then
+  end if;
+end process seq_proc;
+  
+end architecture rtl;

src/fifo_buffer/fifo_buffer.vhd

@@ -0,0 +1,105 @@
+library IEEE;
+use IEEE.std_logic_1164.all;
+use IEEE.MATH_REAL.all;
+use ieee.numeric_std.all;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
+library techmap;
+use techmap.gencomp.all;
+
+entity fifo_buffer is
+  generic (
+    buffer_size : natural := 64;
+    tech : integer := 0;
+    data_width : natural := 8
+  );
+  port (
+    rst, in_clk, out_clk : in std_logic;
+    ready_in : in std_logic;
+    ready_out : out std_logic;
+    valid_in : in std_logic;
+    valid_out : out std_logic;
+    data_in : in std_logic_vector(data_width - 1 downto 0);
+    data_out : out std_logic_vector(data_width - 1 downto 0);
+    used_slots  : out integer range 0 to buffer_size
+  );
+end entity fifo_buffer;
+
+architecture rtl of fifo_buffer is
+  constant address_bits  : natural := integer(ceil(log2(real(buffer_size))));
+  signal read_pointer : std_logic_vector(address_bits - 1 downto 0);
+  signal write_pointer  : std_logic_vector(address_bits - 1 downto 0);
+  signal write_signal    : std_logic;
+  signal buffer_full     : std_logic;
+  signal buffer_empty    : std_logic;
+  signal inverted_in_clock : std_logic;
+  signal customout       : std_logic_vector(0 downto 0); -- techmap needs customout and it is does not have a default value for some reason
+begin
+
+  techmap_ram_inst : entity techmap.syncram_2p
+  generic map(tech => tech, 
+              abits => address_bits, 
+              dbits => data_width,
+              sepclk => 1
+             )
+  port map(
+    rclk     => out_clk,
+    renable  => '1',
+    raddress => read_pointer,
+    dataout  => data_out,
+    wclk     => inverted_in_clock,
+    write    => write_signal,
+    waddress => write_pointer,
+    datain   => data_in,
+    customclk => in_clk, --NOTE: No clue what this does but it has to be set to something
+    customout => customout
+    );
+  
+  inverted_in_clock <= not in_clk;
+comb_proc: process(write_pointer, read_pointer, buffer_full, valid_in, rst)
+  variable write_pointer_inc : unsigned(address_bits - 1 downto 0);
+begin
+  if write_pointer >= read_pointer then
+    used_slots <= to_integer(unsigned(write_pointer) - unsigned(read_pointer));
+  else
+    used_slots <= buffer_size - to_integer(unsigned(read_pointer)) + to_integer(unsigned(write_pointer));
+  end if;
+  ready_out <= not buffer_full;
+  write_signal <= (valid_in and not buffer_full) or rst;
+  write_pointer_inc := unsigned(write_pointer) + 1;
+  customout <= "0";
+  if write_pointer_inc = unsigned(read_pointer) then
+    buffer_full <= '1';
+  else
+    buffer_full <= '0';
+  end if;
+  if write_pointer = read_pointer then
+    buffer_empty <= '1';
+  else
+    buffer_empty <= '0';
+  end if;
+end process comb_proc;
+
+seq_proc: process(rst, in_clk, out_clk, buffer_full, valid_in, ready_in, buffer_empty, write_pointer, read_pointer)
+begin
+  if rst = '1' then
+      read_pointer <= (others => '0');
+      write_pointer <= (others => '0');
+  else
+    if rising_edge(in_clk) then
+      if valid_in = '1' and buffer_full = '0'then
+        write_pointer <= std_logic_vector(unsigned(write_pointer) + 1);
+      end if;
+    end if;
+    if rising_edge(out_clk) then
+      if ready_in = '1' and buffer_empty = '0' then
+        read_pointer <= std_logic_vector(unsigned(read_pointer) + 1);
+        valid_out <= '1';
+      else
+        valid_out <= '0';
+      end if;
+    end if;
+  end if;
+end process seq_proc;
+
+end architecture rtl;

src/fifo_buffer/fifo_deserializer.vhd

@@ -0,0 +1,74 @@
+library IEEE;
+use IEEE.std_logic_1164.all;
+use IEEE.MATH_REAL.all;
+use ieee.numeric_std.all;
+
+entity fifo_deserializer is
+  generic (
+    output_width : natural := 8;
+    input_width  : natural := 8;
+    endianess    : integer := 0  -- 0: little endian, 1: big endian
+  );
+  port (
+    rst, clk : in std_logic;
+    ready_in : in std_logic;
+    ready_out : out std_logic;
+    valid_in : in std_logic;
+    valid_out : out std_logic;
+    data_in : in std_logic_vector(input_width - 1 downto 0);
+    data_out : out std_logic_vector(output_width - 1 downto 0)
+  );
+end entity fifo_deserializer;
+
+architecture rtl of fifo_deserializer is
+
+constant out_over_in : natural := output_width / input_width - 1;
+type state_t is record
+  count : integer;
+  data : std_logic_vector(output_width - 1 downto 0);
+  full_word : std_logic;
+  prev_ready : std_logic;
+end record state_t;
+signal st : state_t;
+begin
+
+comb_proc: process(rst,clk,valid_in,ready_in,data_in,st)
+begin
+  if st.full_word = '1' and ready_in = '1' then
+    valid_out <= '1';
+  else 
+    valid_out <= '0';
+  end if;
+  ready_out <= ready_in;
+  data_out <= st.data;
+end process comb_proc; 
+
+seq_proc: process(clk, rst)
+begin
+  if rst = '1' then
+    st.count <= 0;
+    st.data <= (others => '0');
+    st.full_word <= '0';
+    st.prev_ready <= '0';
+  elsif (rising_edge(clk)) then
+    st.prev_ready <= ready_in;
+    if valid_in = '1' and st.prev_ready = '1' then
+      if endianess = 0 then
+        st.data((out_over_in + 1 - st.count) * input_width  - 1 downto (out_over_in - st.count) * input_width) <= data_in;
+      else
+        st.data((st.count + 1) * input_width - 1 downto st.count * input_width) <= data_in;
+      end if;
+    end if;
+    if st.full_word = '1' and ready_in = '1' then
+      st.full_word <= '0';
+    end if;
+    if st.count = out_over_in and valid_in = '1' then
+      st.full_word <= '1';
+      st.count <= 0;
+    elsif valid_in = '1' then
+      st.count <= st.count + 1;
+    end if;
+  end if;
+end process seq_proc;
+
+end architecture rtl;

src/fifo_buffer/fifo_serializer.vhd

@@ -0,0 +1,76 @@
+library IEEE;
+use IEEE.std_logic_1164.all;
+use IEEE.MATH_REAL.all;
+use ieee.numeric_std.all;
+
+entity fifo_serializer is
+  generic (
+    output_width : natural := 8;
+    input_width  : natural := 8;
+    endianess    : integer := 0 -- 0: little endian, 1: big endian
+  );
+  port (
+    rst, clk : in std_logic;
+    ready_in : in std_logic;
+    ready_out : out std_logic;
+    valid_in : in std_logic;
+    valid_out : out std_logic;
+    data_in : in std_logic_vector(input_width - 1 downto 0);
+    data_out : out std_logic_vector(output_width - 1 downto 0)
+  );
+end entity fifo_serializer;
+
+architecture rtl of fifo_serializer is
+
+constant in_over_out : natural := input_width / output_width - 1;
+type state_t is record
+  count : integer;
+  valid : std_logic;
+  data : std_logic_vector(input_width - 1 downto 0);
+end record state_t;
+signal st : state_t;
+begin
+
+comb_proc: process(rst,clk,valid_in,ready_in,data_in,st)
+begin
+  if st.valid = '0' and valid_in = '0' then
+    ready_out <= '1';
+  else 
+    ready_out <= '0';
+  end if;
+  valid_out <= st.valid;
+  if st.count <= in_over_out and st.valid = '1' then
+    if endianess = 0 then
+      data_out <= st.data((input_width - st.count * output_width) - 1 downto input_width - (st.count + 1) * output_width);
+    else
+      data_out <= st.data((st.count + 1) * output_width - 1 downto st.count * output_width);
+    end if;
+  else
+    data_out <= (others => '0');
+  end if;
+end process comb_proc; 
+
+seq_proc: process(clk, rst)
+begin
+  if rst = '1' then
+    st.count <= 0;
+    st.valid <= '0';
+    st.data <= (others => '0');
+  elsif (rising_edge(clk)) then
+    if valid_in = '1' and st.count = 0 then
+      st.valid <= '1';
+      st.data <= data_in;
+    elsif valid_in = '1' and st.count = in_over_out and ready_in = '1' then
+      st.count <= 0;
+      st.valid <= '1';
+      st.data <= data_in;
+    elsif st.count = in_over_out and ready_in = '1' then
+      st.valid <= '0';
+      st.count <= 0;
+    elsif ready_in = '1' and st.valid = '1' then
+      st.count <= st.count + 1;
+    end if;
+  end if;
+end process seq_proc;
+
+end architecture rtl;

src/ganimede/.gitignore

@@ -0,0 +1 @@
+ganimede

src/ganimede/ganimede.vhd

@@ -1,74 +1,131 @@
 library IEEE;
 use IEEE.std_logic_1164.all;
-library work;
-use work.io_types.all;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
+library gan_socbridge;
+use gan_socbridge.socbridge_driver_pkg.all;
+library gan_controller;
+library gan_manager;
+use gan_manager.management_types.all;
+library gan_buffer;
 
-entity ganimede is
+entity ganimede_toplevel is
+  generic (
+    tech : integer := 0
+          );
   port (
-    clk                 : in std_logic;
-    reset               : in std_logic;
-    ext_interface_in    : in ext_interface_in_t;
-    ext_interface_out   : out ext_interface_out_t;
-    int_interface_in    : in int_interface_in_t;
-    int_interface_out   : out int_interface_out_t
+    clk               : in  std_logic;
+    rst               : in  std_logic;
+    ext_to_ganimede   : in  ext_to_ganimede_t;
+    ganimede_to_ext   : out ganimede_to_ext_t;
+    ip_to_ganimede    : in  ip_to_ganimede_t;
+    ganimede_to_ip    : out ganimede_to_ip_t
   );
-end entity ganimede;
-architecture rtl of ganimede is
+end entity ganimede_toplevel;
+architecture rtl of ganimede_toplevel is
   --- SIGNAL DECLERATIONS ---
-  signal gan_int_interface_in  : int_interface_in_t;
-  signal gan_int_interface_out : int_interface_out_t;
-  signal gan_ext_interface_in  : ext_interface_in_t;
-  signal gan_ext_interface_out : ext_interface_out_t;
+  signal drivers_to_controller : drivers_to_controller_t;
+  signal controller_to_drivers : controller_to_drivers_t;
+  signal manager_to_controller   : manager_to_controller_t;
+  signal controller_to_manager   : controller_to_manager_t;
+  signal socbridge_driver_to_manager : socbridge_driver_to_manager_t;
+  signal manager_to_socbridge_driver : manager_to_socbridge_driver_t;
+  signal socbridge_driver_to_buffer : fifo_interface_t;
+  signal buffer_to_socbridge_driver : fifo_interface_t;
+  signal ip_to_socbridge_driver : ip_to_socbridge_driver_t;
+  signal socbridge_clk : std_logic;
+  signal ganimede_to_ip_reset : std_logic;
 
+  constant buf_size :integer := 2*1024;
   --signal gan_socbridge_WE_in : std_logic;
   --signal gan_socbridge_WE_out : std_logic;
   --signal gan_socbridge_is_full_in : std_logic;
   --signal gan_socbridge_is_full_out : std_logic;
   
-  --- COMPONENT DECLERATIONS ---
-  --component fifo is 
-  --  generic(
-  --    WIDTH : positive;
-  --    DEPTH : positive
-  --  );
-  --  port(
-  --    clk, reset, read_enable, write_enable : in std_logic;
-  --    is_full, is_empty                     : out std_logic;
-  --    data_in      : in std_logic_vector(WIDTH - 1 downto 0);
-  --    data_out     : out std_logic_vector(WIDTH - 1 downto 0)
-  --  );
-  --end component;
-
-  component socbridge_driver is
-    port(
-      clk     : in std_logic;
-      reset   : in std_logic;
-      ext_in  : in ext_to_socbridge_driver_t;
-      ext_out : out socbridge_driver_to_ext_t;
-      int_in  : out buffer_to_socbridge_driver_t;
-      int_out : in socbridge_driver_to_buffer_t
-    );
-  end component;
-
 begin
-  --- CONNECT EXTERNAL SIGNALS TO INTERNAL CONNECTIONS ---
-  gan_int_interface_in  <= int_interface_in;
-  int_interface_out     <= gan_int_interface_out;
-  gan_ext_interface_in  <= ext_interface_in;
-  ext_interface_out     <= gan_ext_interface_out;
-  
+  --- INTERNAL CONNECTIONS ---
+  ip_to_socbridge_driver.fifo <= buffer_to_socbridge_driver;
+  ip_to_socbridge_driver.flush <= ip_to_ganimede.socbridge.flush;
+  ip_to_socbridge_driver.read_fifo.data <= (others => '0');
+  ip_to_socbridge_driver.read_fifo.valid <= '0';
+  ip_to_socbridge_driver.read_fifo.ready <= '0';
+  ganimede_to_ip.socbridge.used_slots <= 0;
+  ganimede_to_ip_reset <= rst or ip_to_ganimede.socbridge.flush;
+
   --- DRIVER INSTANTIATION ---
-  socbridge_driver_inst: socbridge_driver
-   port map(
-      clk     => clk,
-      reset   => reset,
-      ext_in  => gan_ext_interface_in.socbridge,
-      ext_out => gan_ext_interface_out.socbridge,
-      int_in  => gan_int_interface_in.socbridge,
-      int_out => gan_int_interface_out.socbridge
-  );
+  socbridge_driver_inst: entity gan_socbridge.socbridge_driver
+    generic map(
+      BUFFER_SIZE => buf_size
+    )
+    port map(
+      clk                            => clk,
+      socbridge_clk                  => socbridge_clk,
+      rst                            => rst,
+      controller_to_socbridge_driver => controller_to_drivers.socbridge,
+      socbridge_driver_to_controller => drivers_to_controller.socbridge,
+      manager_to_socbridge_driver    => manager_to_socbridge_driver,
+      socbridge_driver_to_manager    => socbridge_driver_to_manager,
+      ext_to_socbridge_driver        => ext_to_ganimede.socbridge,
+      socbridge_driver_to_ext        => ganimede_to_ext.socbridge,
+      ip_to_socbridge_driver         => ip_to_socbridge_driver,
+      socbridge_driver_to_ip         => socbridge_driver_to_buffer
+    );
 
-  --- LATER WE ADD OPTIMIZATIONS HERE ---
+  controller_inst: entity gan_controller.control_unit
+    port map(
+      clk                            => clk,
+      rst                            => rst,
+      manager_to_controller          => manager_to_controller,
+      controller_to_manager          => controller_to_manager,
+      drivers_to_controller          => drivers_to_controller,
+      controller_to_drivers          => controller_to_drivers
+    );
+  
+  manager_inst: entity gan_manager.management_unit
+    port map(
+      clk                            => clk,
+      rst                            => rst,
+      manager_to_controller          => manager_to_controller,
+      controller_to_manager          => controller_to_manager,
+      manager_to_socbridge_driver    => manager_to_socbridge_driver,
+      socbridge_driver_to_manager    => socbridge_driver_to_manager
+    );
 
+  fifo_buffer_to_ip_inst : entity gan_buffer.fifo_buffer
+    generic map (
+      buffer_size => buf_size,
+      tech => tech
+    )
+    port map(
+      in_clk => socbridge_clk,
+      out_clk => clk,
+      rst => ganimede_to_ip_reset,
+      ready_in => ip_to_ganimede.socbridge.fifo.ready,
+      ready_out => buffer_to_socbridge_driver.ready,
+      valid_in => socbridge_driver_to_buffer.valid,
+      valid_out => ganimede_to_ip.socbridge.valid,
+      data_in => socbridge_driver_to_buffer.data,
+      data_out => ganimede_to_ip.socbridge.data,
+      used_slots => ip_to_socbridge_driver.read_fifo.used_slots
+    );
+
+  fifo_buffer_from_ip_inst : entity gan_buffer.fifo_buffer
+    generic map (
+      buffer_size => buf_size,
+      tech => tech
+    )
+    port map(
+      in_clk => clk, 
+      out_clk => socbridge_clk,
+      rst => rst,
+      ready_in => socbridge_driver_to_buffer.ready,
+      ready_out => ganimede_to_ip.socbridge.ready,
+      valid_in => ip_to_ganimede.socbridge.fifo.valid,
+      valid_out => buffer_to_socbridge_driver.valid,
+      data_in => ip_to_ganimede.socbridge.fifo.data,
+      data_out => buffer_to_socbridge_driver.data,
+      used_slots => buffer_to_socbridge_driver.used_slots
+    );
+    
 
 end architecture rtl;

src/ganimede/ganimede_tb.vhd

@@ -0,0 +1,110 @@
+library IEEE;
+use IEEE.std_logic_1164.all;
+use IEEE.NUMERIC_STD.all;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
+library gan_socbridge;
+use gan_socbridge.socbridge_driver_pkg.all;
+library gan_controller;
+
+entity ganimede_tb is
+end entity ganimede_tb;
+
+architecture tb of ganimede_tb is
+
+  signal done : boolean := false;
+  constant CLK_PERIOD                           : Time := 10 ns;
+  constant SIMULATION_CYCLE_COUNT               : integer := 2000;
+  signal clk, rst                               : std_logic := '0';
+  signal controller_to_socbridge_driver_cmd     : instruction_command_t;
+  signal controller_to_socbridge_driver_address : std_logic_vector(31 downto 0);
+  signal cmd_size                               : positive;
+  signal ext_to_ganimede                : ext_to_ganimede_t := (socbridge => (
+    payload => (others => '0'),
+    control => (others => '0')
+  ));
+  signal ganimede_to_ext : ganimede_to_ext_t;
+  signal ganimede_to_ip  : ganimede_to_ip_t;
+  signal ganimede_to_manager : controller_to_manager_t;
+  signal manager_to_ganimede : manager_to_controller_t := (
+    driver_id => (others => '0'),
+    address => (others => '0'),
+    seq_mem_access_count => 0,
+    cmd => (others => '0')
+  );
+  signal ip_to_ganimede : ip_to_ganimede_t := (socbridge => (
+    payload => (others => '0'),
+    write_enable_out => '0',
+    is_full_in => '0'
+  ));
+  signal manager_to_controller: manager_to_controller_t := (
+    driver_id => (others => '0'),
+    address => (others => '0'),
+    seq_mem_access_count => 0,
+    cmd => "00"
+  );
+  signal drivers_to_controller: drivers_to_controller_t := (socbridge => (is_active => '0'));
+  signal controller_to_manager: controller_to_manager_t;
+  signal controller_to_drivers: controller_to_drivers_t;
+
+
+begin
+  ganimede_inst: entity gan_ganimede.ganimede_toplevel
+    port map(
+      clk                    => clk,
+      rst                    => rst,
+      manager_to_ganimede        => manager_to_ganimede,
+      ganimede_to_manager        => ganimede_to_manager,
+      ext_to_ganimede        => ext_to_ganimede,
+      ganimede_to_ext        => ganimede_to_ext,
+      ip_to_ganimede         => ip_to_ganimede,
+      ganimede_to_ip         => ganimede_to_ip
+    );
+  
+  ext_to_ganimede.socbridge.control(1) <= clk;
+  real_clk_proc: process
+    variable cycle_count :integer := 0;
+  begin
+    while (not done) and (cycle_count < MAX_CYCLE_COUNT) loop
+      clk <= not clk;
+      wait for CLK_PERIOD / 2;
+    end loop;
+    wait;
+  end process real_clk_proc;
+  
+  stimulus_proc: process
+  begin
+    report "Starting Simulation Stimulus!";
+    done <= false;
+    rst <= '1';
+    wait for 3 * CLK_PERIOD;
+    report "Reset grace period ended, starting stimulus...";
+    rst <= '0';
+
+    report "Test finished, ending simultaion...";
+    done <= true;
+    wait;
+  end process stimulus_proc;
+
+  internal_stimulus: process
+    variable input : positive := 1;
+  begin
+    ip_to_ganimede.socbridge.is_full_in <= '0';
+    ip_to_ganimede.socbridge.write_enable_out <= '0';
+    wait for 3 * CLK_PERIOD;
+    -- stimulus goes here
+    ip_to_ganimede.socbridge.write_enable_out <= '1';
+    ip_to_ganimede.socbridge.payload <= std_logic_vector(to_unsigned(input, ip_to_ganimede.socbridge.payload'length));
+    input := input + 1 mod 256;
+    wait until rising_edge(clk) and ganimede_to_ip.socbridge.is_full_out = '0';
+    wait until falling_edge(clk);
+    for x in 0 to 1000 loop
+      ip_to_ganimede.socbridge.payload <= std_logic_vector(to_unsigned(input, ip_to_ganimede.socbridge.payload'length));
+      input := input + 1 mod 256;
+      wait until rising_edge(clk) and ganimede_to_ip.socbridge.is_full_out = '0';
+      wait until falling_edge(clk);
+    end loop;
+    wait;
+  end process internal_stimulus;
+
+end architecture tb;

src/ganimede/io_type_pkg.vhd

@@ -5,64 +5,60 @@ use IEEE.MATH_REAL.all;
 package io_types is
   
   --- CONSTANTS ---
-  constant number_of_drivers: natural := 1;
-  constant address_width: natural := 32;
-  constant seq_vector_length: natural := 8;
-  constant inst_word_width: natural := 2;
+  constant number_of_drivers : natural := 1;
+  constant address_width     : natural := 32;
+  constant inst_word_width   : natural := 2;
+  constant fifo_width        : natural := 8;
 
   --- STANDARD TYPES ---
   type instruction_command_t is (NO_OP, READ, WRITE);
 
+  type fifo_interface_t is record
+    ready, valid : std_logic;
+    data : std_logic_vector(fifo_width - 1 downto 0);
+    used_slots : integer;
+  end record fifo_interface_t;
+
   type ext_protocol_def_t is record
     name: string (1 to 20);
-    payload_width: natural;
-    control_width_in, control_width_out: natural;
+    payload_width                       : natural;
+    control_width_in, control_width_out : natural;
   end record ext_protocol_def_t;
 
   type interface_inst_t is record
-    socbridge: ext_protocol_def_t;
+    socbridge : ext_protocol_def_t;
   end record interface_inst_t;
 
   --- CONTROL UNIT ---
-  type cpu_to_controller_t is record
-    driver_id: std_logic_vector(number_of_drivers - 1 downto 0);
-    address: std_logic_vector(address_width - 1 downto 0);
-    seq_mem_access_count: integer;
-    cmd: std_logic_vector(1 downto 0);
-  end record cpu_to_controller_t;
+  type manager_to_controller_t is record
+    driver_id            : std_logic_vector(number_of_drivers - 1 downto 0);
+    address              : std_logic_vector(address_width - 1 downto 0);
+    seq_mem_access_count : integer;
+    cmd                  : std_logic_vector(1 downto 0); --Noop: 00; Write: 01; Read: 10 
+  end record manager_to_controller_t;
 
-  type controller_to_cpu_t is record
-    ready: std_logic;
-  end record controller_to_cpu_t;
-
-  --type controller_to_socbridge_driver_t is record
-  --  driver_id: std_logic_vector(number_of_drivers - 1 downto 0);
-  --  address: std_logic_vector(address_width - 1 downto 0);
-  --  seq_mem_access_count: integer;
-  --  instruction: instruction_command_t;
-  --end record controller_to_socbridge_driver_t;
-
-  --type socbridge_driver_to_controller_t is record
-  --  active_driver: std_logic_vector(number_of_drivers - 1 downto 0);
-  --end record socbridge_driver_to_controller_t;
-
-  type socbridge_driver_to_controller_t is record
-    is_active : std_logic;    
-  end record socbridge_driver_to_controller_t;
-
-  type controller_to_socbridge_driver_t is record
-    request: std_logic;
-    address: std_logic_vector(address_width - 1 downto 0);
-    seq_mem_access_count: integer;
-    instruction: instruction_command_t;
-  end record controller_to_socbridge_driver_t;
+  type controller_to_manager_t is record
+    ready, done_reading, done_writing : std_logic;
+  end record controller_to_manager_t;
 
   --- PROTOCOL INFORMATION ---
   constant interface_inst : interface_inst_t := (
     socbridge => ("SoCBridge           ", 8, 2, 2)
-  ); 
+  );
 
   --- AUTOGENERATED TYPES ---
+  type socbridge_driver_to_controller_t is record
+    is_reading : std_logic;
+    is_writing : std_logic;
+  end record socbridge_driver_to_controller_t;
+
+  type controller_to_socbridge_driver_t is record
+    request              : std_logic;
+    address              : std_logic_vector(address_width - 1 downto 0);
+    seq_mem_access_count : integer;
+    instruction          : instruction_command_t;
+  end record controller_to_socbridge_driver_t;
+
   type ext_to_socbridge_driver_t is record 
     payload : STD_LOGIC_VECTOR(interface_inst.socbridge.payload_width - 1 downto 0);
     control : STD_LOGIC_VECTOR(interface_inst.socbridge.control_width_in - 1 downto 0);
@@ -73,30 +69,36 @@ package io_types is
     control : STD_LOGIC_VECTOR(interface_inst.socbridge.control_width_in - 1 downto 0);
   end record socbridge_driver_to_ext_t;
 
-  type socbridge_driver_to_buffer_t is record 
-    payload : STD_LOGIC_VECTOR(interface_inst.socbridge.payload_width - 1 downto 0);
-    write_enable_in, is_full_out : std_logic;
-  end record socbridge_driver_to_buffer_t;
+  subtype socbridge_driver_to_ip_t is fifo_interface_t;
 
-  type buffer_to_socbridge_driver_t is record 
-    payload : STD_LOGIC_VECTOR(interface_inst.socbridge.payload_width - 1 downto 0);
-    write_enable_out, is_full_in : std_logic;
-  end record buffer_to_socbridge_driver_t;
+  type ip_to_socbridge_driver_t is record
+    fifo: fifo_interface_t;
+    read_fifo: fifo_interface_t;
+    flush: std_logic;
+  end record ip_to_socbridge_driver_t;
 
-  type ext_interface_in_t is record
-    socbridge : ext_to_socbridge_driver_t;     
-  end record ext_interface_in_t;
+  type controller_to_drivers_t is record
+    socbridge : controller_to_socbridge_driver_t;
+  end record controller_to_drivers_t;
 
-  type ext_interface_out_t is record
+  type drivers_to_controller_t is record
+    socbridge : socbridge_driver_to_controller_t;
+  end record drivers_to_controller_t;
+
+  type ext_to_ganimede_t is record
+    socbridge : ext_to_socbridge_driver_t;
+  end record ext_to_ganimede_t;
+
+  type ganimede_to_ext_t is record
     socbridge : socbridge_driver_to_ext_t;
-  end record ext_interface_out_t;
+  end record ganimede_to_ext_t;
 
-  type int_interface_out_t is record
-    socbridge : socbridge_driver_to_buffer_t;
-  end record int_interface_out_t;
+  type ganimede_to_ip_t is record
+    socbridge : socbridge_driver_to_ip_t;
+  end record ganimede_to_ip_t;
 
-  type int_interface_in_t is record
-    socbridge : buffer_to_socbridge_driver_t;
-  end record int_interface_in_t;
+  type ip_to_ganimede_t is record
+    socbridge : ip_to_socbridge_driver_t;
+  end record ip_to_ganimede_t;
 
 end package io_types;

src/gantry.toml

@@ -0,0 +1,65 @@
+title = "ganimede"
+createdAt = "2025-03-14"
+maintainer = ""
+email = ""
+version = "0.0.1"
+
+[libraries.gan_socbridge]
+vhdl-version = "93c"
+path = "socbridge"
+
+[libraries.gan_manager]
+vhdl-version = "93c"
+path = "manager"
+
+[libraries.gan_ganimede]
+vhdl-version = "93c"
+path = "ganimede"
+
+[libraries.gan_controller]
+vhdl-version = "93c"
+path = "controller"
+
+[libraries.gan_dummy_ip]
+vhdl-version = "93c"
+path = "dummy_ip"
+
+[libraries.gan_testbenches]
+vhdl-version = "93c"
+path = "control_socbridge_merge"
+
+[libraries.gaisler]
+vhdl-version = "93c"
+path = "grlib-com-nx-2024.4-b4295/lib/gaisler"
+
+[libraries.grlib]
+vhdl-version = "93c"
+path = "grlib-com-nx-2024.4-b4295/lib/grlib"
+
+[libraries.gr_socbridge_tb]
+vhdl-version = "93c"
+path = "grlib-com-nx-2024.4-b4295/verification/socbridge"
+
+[libraries.techmap]
+vhdl-version = "93c"
+path = "grlib-com-nx-2024.4-b4295/lib/techmap"
+
+[libraries.opencores]
+vhdl-version = "93c"
+path = "grlib-com-nx-2024.4-b4295/lib/opencores"
+
+[libraries.eth]
+vhdl-version = "93c"
+path = "grlib-com-nx-2024.4-b4295/lib/eth"
+
+[libraries.micron]
+vhdl-version = "93c"
+path = "grlib-com-nx-2024.4-b4295/lib/micron"
+
+[libraries.ahb2ahb]
+vhdl-version = "93c"
+path = "grlib-com-nx-2024.4-b4295/verification/ahb2ahb"
+
+[libraries.gan_buffer]
+vhdl-version = "93c"
+path = "fifo_buffer"

src/manager/management_unit.vhd

@@ -0,0 +1,112 @@
+library IEEE;
+use IEEE.std_logic_1164.all;
+use IEEE.MATH_REAL.all;
+use ieee.numeric_std.all;
+library gan_manager;
+use gan_manager.management_types.all;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
+
+entity management_unit is
+  port (
+    clk, rst                    : in std_logic;
+    manager_to_controller       : out manager_to_controller_t;
+    controller_to_manager       : in controller_to_manager_t; 
+    socbridge_driver_to_manager : in socbridge_driver_to_manager_t;
+    manager_to_socbridge_driver : out manager_to_socbridge_driver_t 
+  );
+
+end entity management_unit;
+
+architecture rtl of management_unit is
+  signal manager_state : manager_state_t;
+  signal write_address : manager_word_t;
+  signal read_address  : manager_word_t;
+  -- Address indexing whole words, not bytes
+  signal word_address  : natural;
+  signal cmd : std_logic_vector(1 downto 0);
+
+  function pack(word: manager_word_t) return std_logic_vector is
+  begin
+    return word.address & word.size & word.command & word.reserved;
+  end function;
+  function unpack(word: std_logic_vector) return manager_word_t is
+    variable val : manager_word_t;
+  begin
+    val.address := word(31 downto 10);
+    val.size := word(9 downto 6);
+    val.command := word(5 downto 3);
+    val.reserved := word(2 downto 0);
+    return val;
+  end function;
+
+begin
+
+read_address  <= manager_state.memory(0);
+write_address <= manager_state.memory(1);
+
+comb_proc: process(controller_to_manager, socbridge_driver_to_manager,manager_state)
+  variable local_word_address : natural;
+begin
+  local_word_address := to_integer(shift_right(unsigned(socbridge_driver_to_manager.address), address_shift)) mod mem_words;
+  -- Read data from manager to SoCBridge driver
+  manager_to_socbridge_driver.ready <= '1';
+  manager_to_socbridge_driver.data <= pack(manager_state.memory(local_word_address));
+  manager_to_socbridge_driver.valid <= '1';
+  word_address <= local_word_address;
+  manager_to_controller.cmd <= cmd;
+end process comb_proc;
+
+-- tre sorters sätt att avsluta en skrivning:
+-- timeout om vi villha det
+-- en lastbit genom axi interface
+-- vi har fått all data vi begärde.
+
+seq_proc: process(clk)
+begin
+  if rising_edge(clk) then
+    if rst = '1' then
+      manager_state.data_out <= manager_word_reset_val;
+      manager_state.memory(0).reserved(0) <= '0';
+      manager_state.memory(1).reserved(0) <= '0';
+    else
+      -- Write data from SoCBridge driver to address
+      if socbridge_driver_to_manager.valid = '1' then
+        manager_state.memory(word_address) <= unpack(socbridge_driver_to_manager.data);
+        if socbridge_driver_to_manager.address = read_address_index
+        or socbridge_driver_to_manager.address = write_address_index then
+          -- CLEAR BUFFER TO IP CORE
+        end if;
+      -- Is the controller done executing an instruction
+      else
+        if controller_to_manager.done_reading = '1' then
+          manager_state.memory(0).reserved(0) <= '0';
+        end if;
+        if controller_to_manager.done_writing = '1' then
+          manager_state.memory(1).reserved(0) <= '0';
+        end if;
+      end if;
+      -- Is there a read instruction in memory
+      if read_address.reserved(0) = '1' and controller_to_manager.ready = '1' and controller_to_manager.done_reading = '0' then
+        manager_to_controller.address <= read_address.address & "0000000000";
+        manager_to_controller.driver_id <= "1"; -- Only supprts one driver at present
+        manager_to_controller.seq_mem_access_count <= 2**to_integer(unsigned(read_address.size)) * 2**10;
+        cmd <= "10";
+      -- Is there a write instruction in memory
+      elsif write_address.reserved(0) = '1' and controller_to_manager.ready = '1' and controller_to_manager.done_writing = '0'then
+        manager_to_controller.address <= write_address.address & "0000000000";
+        manager_to_controller.driver_id <= "1"; -- Only supports one driver at present
+        manager_to_controller.seq_mem_access_count <= 2**to_integer(unsigned(write_address.size)) * 2**10;
+        cmd <= "01";
+      else
+      -- No instruction present in memory, all zeroes to control unit
+        manager_to_controller.address <= (others => '0');
+        manager_to_controller.driver_id <= "0"; -- Only supprts one driver at present
+        manager_to_controller.seq_mem_access_count <= 0;
+        cmd <= "00";
+      end if;
+    end if;
+  end if;
+end process seq_proc;
+
+end architecture rtl ;

src/manager/management_unit_pkg.vhd

@@ -0,0 +1,58 @@
+library IEEE;
+use IEEE.std_logic_1164.all;
+use IEEE.NUMERIC_STD.all;
+use IEEE.MATH_REAL.all;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
+
+package management_types is
+  constant WORD_SIZE : natural := 32;
+  -- Amount to right shift addres to convert e.g 0x00000004 to 0x00000001 for 32-bit words
+  constant address_shift : natural := natural(CEIL(LOG2(real(WORD_SIZE) / real(8))));
+  type manager_word_t is record
+    address: std_logic_vector(21 downto 0);
+    size: std_logic_vector(3 downto 0);
+    command: std_logic_vector(2 downto 0);
+    reserved: std_logic_vector(WORD_SIZE - 1 - (22 + 4 + 3) downto 0);
+  end record manager_word_t;
+  constant empty_word : std_logic_vector(WORD_SIZE - 1 downto 0) := (others => '0');
+  constant mem_words : natural := 2;
+  constant min_bits_to_determine_address : natural := natural(CEIL(LOG2(real(mem_words))));
+  constant address_mask : std_logic_vector(WORD_SIZE - 1 downto 0) := std_logic_vector(to_unsigned(mem_words - 1, 32));
+  type memory_t is array (0 to mem_words - 1) of manager_word_t;
+
+  -- Index in memory array where memory read address is kept.
+  -- Read is active while it is not all zero.
+  constant read_address_index  : std_logic_vector(WORD_SIZE - 1 downto 0) := x"00000000";
+  -- Index in memory array where memory write address is kept.
+  -- Write is active while it is not all zero. Mutex with read address
+  constant write_address_index : std_logic_vector(WORD_SIZE - 1 downto 0) := x"00000001";
+
+  -- Status register for debugging
+  type manager_state_t is record
+    memory : memory_t;
+    data_out : manager_word_t;
+  end record manager_state_t;
+
+  -- reset value of status register
+  constant manager_word_reset_val : manager_word_t := (
+  address => (others =>'0'),
+  size => (others => '0'),
+  command => (others => '0'),
+  reserved => (others => '0') 
+);
+  constant manager_state_reset_val : manager_state_t := ((others => manager_word_reset_val), manager_word_reset_val);
+
+  type socbridge_driver_to_manager_t is record
+    address : std_logic_vector(WORD_SIZE - 1 downto 0);
+    data : std_logic_vector(WORD_SIZE - 1 downto 0);
+    valid: std_logic;
+  end record socbridge_driver_to_manager_t;
+
+  type manager_to_socbridge_driver_t is record
+    data : std_logic_vector(WORD_SIZE - 1 downto 0);
+    valid : std_logic;
+    ready : std_logic;
+  end record manager_to_socbridge_driver_t;
+
+end package;

src/manager/management_unit_tb.vhd

@@ -0,0 +1,124 @@
+library IEEE;  
+use IEEE.std_logic_1164.all;
+use IEEE.MATH_REAL.all;
+use IEEE.numeric_std.all;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
+library gan_manager;
+use gan_manager.management_types.all;
+
+entity management_unit_tb is
+end entity management_unit_tb;
+
+architecture tb of management_unit_tb is
+  signal clk : std_logic := '0';
+  signal rst : std_logic;
+  
+  signal manager_to_controller       : manager_to_controller_t;       
+  signal controller_to_manager       : controller_to_manager_t := (ready => '0', done => '0'); 
+  signal socbridge_driver_to_manager : socbridge_driver_to_manager_t := (
+    address => (others => '0'),
+    data => (others => '0'),
+    valid => '0'
+  );
+  signal manager_to_socbridge_driver : manager_to_socbridge_driver_t; 
+
+  constant halfcycle: Time := 5 ns;
+  constant cycle: Time := 2 * halfcycle;
+
+  function to_string ( a: std_logic_vector) return string is
+  variable b : string (1 to a'length) := (others => NUL);
+  variable stri : integer := 1; 
+  begin
+      for i in a'range loop
+          b(stri) := std_logic'image(a((i)))(2);
+      stri := stri+1;
+      end loop;
+  return b;
+  end function;
+
+begin
+  
+  clock_proc: process
+  begin
+  for i in 0 to 50 loop
+    wait for halfcycle;
+    clk <= not clk;
+  end loop;
+  wait;
+  end process clock_proc;
+
+  management_unit_inst: entity gan_manager.management_unit
+    port map(
+    clk             => clk,
+    rst             => rst,
+    manager_to_controller       => manager_to_controller,
+    controller_to_manager       => controller_to_manager, 
+    socbridge_driver_to_manager => socbridge_driver_to_manager,
+    manager_to_socbridge_driver => manager_to_socbridge_driver 
+    );
+  
+tb_proc: process
+begin
+  controller_to_manager.ready <= '0'; 
+  rst <= '1';
+  wait for cycle;
+  rst <= '0';
+
+  report "Testing write to 0x00000014";
+  socbridge_driver_to_manager.data <= x"FA0FA0FA";
+  socbridge_driver_to_manager.address <= x"00000014";
+  socbridge_driver_to_manager.valid <= '1';
+  wait for cycle;
+  socbridge_driver_to_manager.valid <= '0';
+  socbridge_driver_to_manager.data <= x"00000000";
+  socbridge_driver_to_manager.address <= x"00000000";
+  wait for halfcycle;
+  assert manager_to_socbridge_driver.data = x"FA0FA0FA" report "Write to address 0x00000005 failed! expected 0xFA0FA0FA but got " & natural'image(to_integer(unsigned(manager_to_socbridge_driver.data))) severity error;
+
+  wait for 5 * cycle;
+
+  report "Testing submission of write instruction of 10 words to address 0x40000000";
+  controller_to_manager.ready <= '1';
+  socbridge_driver_to_manager.data <= x"40000000";
+  socbridge_driver_to_manager.address <= x"00000004";
+  socbridge_driver_to_manager.valid <= '1';
+  wait for cycle;
+  socbridge_driver_to_manager.data <= x"0000000A";
+  socbridge_driver_to_manager.address <= x"00000008";
+  socbridge_driver_to_manager.address <= x"00000000";
+  socbridge_driver_to_manager.valid <= '1';
+  wait for cycle;
+  socbridge_driver_to_manager.valid <= '0';
+  socbridge_driver_to_manager.data <= x"00000000";
+  wait for cycle;
+  controller_to_manager.ready <= '1';
+  wait for halfcycle;
+  assert manager_to_controller.address = x"40000000" report "Controller got the wrong address! Expected 0x40000000 but got " & to_string(manager_to_controller.address) severity error;
+  assert manager_to_controller.cmd = "10" report "Controller got the wrong command! Expected 0b10 but got " & to_string(manager_to_controller.cmd) severity error;  
+  assert manager_to_controller.seq_mem_access_count = 10 report "Controller got the wrong message size! expected 10 but got " & natural'image(manager_to_controller.seq_mem_access_count) severity error;  
+
+  wait for 5 * cycle;
+  controller_to_manager.ready <= '0'; 
+
+  report "Testing submission of read instruction of 20 words from address 0x50000000";
+  socbridge_driver_to_manager.data <= x"50000000";
+  socbridge_driver_to_manager.address <= x"00000000";
+  socbridge_driver_to_manager.valid <= '1';
+  wait for cycle;
+  socbridge_driver_to_manager.data <= x"00000014";
+  socbridge_driver_to_manager.address <= x"00000008";
+  socbridge_driver_to_manager.valid <= '1';
+  wait for cycle;
+  socbridge_driver_to_manager.valid <= '0';
+  socbridge_driver_to_manager.address <= x"00000000";
+  socbridge_driver_to_manager.data <= x"00000000";
+  controller_to_manager.ready <= '1';
+  wait for halfcycle;
+  assert manager_to_controller.address = x"50000000" report "Controller got the wrong address! Expected 0x50000000 but got " & to_string(manager_to_controller.address) severity error;
+  assert manager_to_controller.cmd = "01" report "Controller got the wrong command! Expected 0b01 but got " & to_string(manager_to_controller.cmd) severity error;  
+  assert manager_to_controller.seq_mem_access_count = 20 report "Controller got the wrong message size! expected 20 but got " & natural'image(manager_to_controller.seq_mem_access_count) severity error;  
+  wait;
+end process tb_proc;
+  
+end architecture tb ;

src/socbridge/socbridge_driver.vhd

@@ -1,362 +1,556 @@
 library IEEE;
 use IEEE.std_logic_1164.all;
 use IEEE.NUMERIC_STD.all;
-library ganimede;
-use ganimede.io_types.all;
-library socbridge;
-use socbridge.socbridge_driver_tb_pkg.all;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
+library gan_socbridge;
+use gan_socbridge.socbridge_driver_pkg.all;
+library gan_manager;
+use gan_manager.management_types.all;
+library grlib;
+use grlib.stdlib.all;
 
 
 entity socbridge_driver is
+  generic(
+    MAX_PKT_SIZE : integer range 1 to 128 := 8;
+    BUFFER_SIZE : integer
+         );
   port(
     clk                            : in std_logic;
     rst                            : in std_logic;
+    socbridge_clk                  : out std_logic;
     controller_to_socbridge_driver : in controller_to_socbridge_driver_t;
     socbridge_driver_to_controller : out socbridge_driver_to_controller_t;
+    manager_to_socbridge_driver    : in manager_to_socbridge_driver_t;
+    socbridge_driver_to_manager    : out socbridge_driver_to_manager_t;
     ext_to_socbridge_driver        : in ext_to_socbridge_driver_t;
     socbridge_driver_to_ext        : out socbridge_driver_to_ext_t;
-    socbridge_driver_to_buffer     : out socbridge_driver_to_buffer_t;
-    buffer_to_socbridge_driver     : in buffer_to_socbridge_driver_t
+    ip_to_socbridge_driver         : in ip_to_socbridge_driver_t;
+    socbridge_driver_to_ip         : out socbridge_driver_to_ip_t
   );
 end entity socbridge_driver;
 
 architecture rtl of socbridge_driver is
-  
+  type slice is array(0 to 3) of natural;
+  constant next_slice_32_8_upper : slice := (31, 7, 15, 23);
+  constant next_slice_32_8_lower : slice := (24, 0, 8, 16);
+
   signal next_parity_out                           : std_logic;
-  signal ext_to_socbridge_driver_rec               : ext_protocol_t;
-  shared variable socbridge_driver_to_ext_data_cmd : std_logic_vector(interface_inst.socbridge.payload_width - 1 downto 0);
-  signal test                                      : std_logic_vector(interface_inst.socbridge.payload_width - 1 downto 0);
-  signal next_cmd                                  : command_t;
-  signal next_cmd_size                             : integer;
-  signal next_state                                : state_t;
-  signal curr_cmd_bits                             : std_logic_vector(4 downto 0);
-  signal curr_response                             : response_t;
-  signal curr_response_bits                        : std_logic_vector(4 downto 0);
+  signal next_data_out                             : std_logic_vector(interface_inst.socbridge.payload_width - 1 downto 0);
+  signal next_rx_transaction                       : transaction_t;
+  signal next_tx_transaction                       : transaction_t;
+  signal next_tx_data_size, next_rx_data_size      : natural;
+  signal next_rx_state                             : rx_state_t;
+  signal next_tx_state                             : tx_state_t;
   signal st                                        : state_rec_t;
   --- TRANSLATOR ---
-  signal trans_st : translator_state_rec_t;
-  signal trans_next_state : translator_state_t;
+  signal trans_st : translator_state_t;
+  signal trans_read_next_state : ctrl_inst_state_t;
+  signal trans_write_next_state : ctrl_inst_state_t;
+  --- FSM COMMUNICATION ---
+  --- MANAGEMENT COMMUNICATION ---
 begin
-  --- DEBUG GLOBAL BINDINGS ---
-  -- synthesis translate_off
-  G_next_parity_out <= next_parity_out;
-  G_ext_to_socbridge_driver_rec <= ext_to_socbridge_driver_rec;
-  G_next_state <= next_state;
-  G_socbridge_driver_to_ext_data_cmd <=test;
-  G_curr_command_bits <= curr_cmd_bits;
-  G_curr_response <= curr_response;
-  G_curr_response_bits <= curr_response_bits;
-  G_st <= st;
-  G_trans_st <= trans_st;
-  -- synthesis translate_on
-  ext_to_socbridge_driver_rec.data <= ext_to_socbridge_driver.payload;
-  ext_to_socbridge_driver_rec.clk <= ext_to_socbridge_driver.control(1);
-  ext_to_socbridge_driver_rec.parity <= ext_to_socbridge_driver.control(0);
 
-  -- Helpful Bindings --
-  curr_response_bits <= ext_to_socbridge_driver.payload(7 downto 3); -- CANT USE ext_to_socbridge_driver_REC here for some reason, the assignment becomes stasteful
-                                                    -- Not sure that the two process method is helping here: if this was a normal
-                                                    -- signal assignment there would be no confusion.
-                                                    -- in the case ... <= ext_to_socbridge_driver_rec we get
-                                                    -- curr_resp | ext_to_socbridge_driver_rec | ext_to_socbridge_driver
-                                                    -- 00000     | 00000000   | 00001001 
-                                                    -- 00000     | 00001001   | 00001001 
-                                                    -- 00001     | 00001001   | 00001001 
-                                                    -- 00001     | 00001001   | 00001001 
-                                                    -- 
-                                                    -- but in the case ... <= ext_to_socbridge_driver we get
-                                                    -- curr_resp | ext_to_socbridge_driver_rec | ext_to_socbridge_driver
-                                                    -- 00000     | 00000000   | 00001001 
-                                                    -- 00001     | 00001001   | 00001001 
-                                                    -- 00001     | 00001001   | 00001001 
-                                                    -- 00001     | 00001001   | 00001001 
-                                                  
-  with curr_response_bits select
-    curr_response <= WRITE_ACK when "00001",
-                      WRITE_ACK when "00101",
-                      READ_RESPONSE when "01000",
-                      READ_RESPONSE when "01100",
-                      NO_OP when others;
-  comb_proc: process(ext_to_socbridge_driver, buffer_to_socbridge_driver, curr_response, st, controller_to_socbridge_driver, trans_st)
+  comb_proc: process(ext_to_socbridge_driver, ip_to_socbridge_driver, 
+                     controller_to_socbridge_driver, st, trans_st)
+    variable curr_response_bits : std_logic_vector(4 downto 0);
+    variable local_next_rx_transaction : transaction_t;
+    variable local_next_tx_transaction : transaction_t;
+    variable local_next_data_out :  std_logic_vector(interface_inst.socbridge.payload_width - 1 downto 0);
+    variable ext_to_socbridge_driver_rec : ext_protocol_t;
   begin
-    -- Outputs 
-    socbridge_driver_to_ext <= create_io_type_out_from_ext_protocol(st.socbridge_driver_to_ext_reg);
-    with trans_st.curr_state select
-    socbridge_driver_to_controller.is_active <= '0' when IDLE,
-                          '1' when others;
+    -- DEFAULT VALUES
+    -- Helpful Bindings --
+    ext_to_socbridge_driver_rec.data := ext_to_socbridge_driver.payload;
+    ext_to_socbridge_driver_rec.clk := ext_to_socbridge_driver.control(1);
+    ext_to_socbridge_driver_rec.parity := ext_to_socbridge_driver.control(0);
+    socbridge_clk <= ext_to_socbridge_driver_rec.clk;
+    socbridge_driver_to_ip.used_slots <= 0;
+    next_rx_data_size <= 2 ** to_integer(unsigned(ext_to_socbridge_driver_rec.data(2 downto 0)));
+    curr_response_bits := ext_to_socbridge_driver_rec.data(7 downto 3); 
+      -- Set helper var to current transaction seen at the input.
+    local_next_rx_transaction := NO_OP;
+    if curr_response_bits = "10000" then 
+      local_next_rx_transaction := WRITE_ADD;
+    elsif curr_response_bits = "10100" then
+      local_next_rx_transaction := WRITE;
+    elsif curr_response_bits = "11000" then
+      local_next_rx_transaction := READ_ADD;
+    elsif curr_response_bits = "11100" then
+      local_next_rx_transaction := READ;
+    elsif curr_response_bits = "01001" then
+      local_next_rx_transaction := P_ERR;
+    elsif curr_response_bits = "00101" or curr_response_bits = "00001" then
+      local_next_rx_transaction := WRITE_ACK;
+    elsif curr_response_bits = "01100" or curr_response_bits = "01000" then
+      local_next_rx_transaction := READ_RESPONSE;
+    end if;
+    -- Outputs --
+    socbridge_driver_to_ext.payload <= st.socbridge_driver_to_ext_reg.data;
+    socbridge_driver_to_ext.control(0) <= st.socbridge_driver_to_ext_reg.parity;
+    socbridge_driver_to_ext.control(1) <= st.socbridge_driver_to_ext_reg.clk;
+    if trans_st.read.state = IDLE then
+      socbridge_driver_to_controller.is_reading <= '0';
+    else 
+      socbridge_driver_to_controller.is_reading <= '1';
+    end if;
+    if trans_st.write.state = IDLE then
+      socbridge_driver_to_controller.is_writing <= '0';
+    else 
+      socbridge_driver_to_controller.is_writing <= '1';
+    end if;
 
-    --- State Transition Diagram ---
---                                                            
---                                               
---                                               
---           +-----+                                     
---           |     |                                             
---          \|/ /--+                                             
---          IDLE<-------------------+                 
---          /  \                    |                            
---         /     \                  |                            
---        /       \                 |                            
---      \|/       \|/               |                         
---  TX_HEADER   RX_HEADER           |                        
---       |\     /    |              |                           
---       | \   /     |              |                           
---       |  ADDR1    |              |                           
---       |    |      |              |                           
---       |   \|/     |              |                           
---       |  ADDR2    |              |                           
---       |    |      |              |                           
---       |   \|/     |              |                           
---       |  ADDR3    |              |                           
---       |    |      |              |                           
---       |   \|/     |              |                           
---       |  ADDR4    |              |                           
---       |   /\      |              |                           
---       |  /  \     |              |                           
---       |-+    +----|     +---+    |                           
---      \|/         \|/   \|/  |    |                           
---   TX_BODY     RX_RESPONSE---+    |                           
---       |           |              |                           
---       |  +--+     |              |                           
---      \|/\|/ |    \|/             |                           
---     TX_ACK--+ RX_BODY            |                           
---       |           |              |                           
---       |           |              |                           
---       +-----------+--------------+                 
---                                                            
-  --- Next State Assignment --- 
-    case st.curr_state is
-      when IDLE => 
-        if st.curr_cmd = WRITE or st.curr_cmd = WRITE_ADD then
-          next_state <= TX_HEADER;
-        elsif st.curr_cmd = READ or st.curr_cmd = READ_ADD then
-          next_state <= RX_HEADER;
-        else
-          next_state <= IDLE;
-        end if;
-      when TX_HEADER =>
-      -- The header only takes one word (cycle) to transmit.
-      -- Continue to body or address directly afterwards. 
-        if st.curr_cmd = WRITE_ADD then
-          next_state <= ADDR1;
-        else 
-          next_state <= TX_BODY;
-        end if;
-      when TX_BODY =>
-      -- Here we want to stay in TX_BODY for the duration of a packet.
-        if st.write_stage = 0 then
-          next_state <= TX_ACK;
-        else 
-          next_state <= TX_BODY;
-        end if;
-      when TX_ACK =>
-      -- Wait for write acknowledgement. 
-        if curr_response = WRITE_ACK then
-          next_state <= IDLE;
-        else 
-          next_state <= TX_ACK;
-        end if;
-      when RX_HEADER =>
-      -- The header only takes one word (cycle) to transmit.
-      -- Continue to awaiting response directly afterwards.
-        if st.curr_cmd = READ_ADD then
-          next_state <= ADDR1;
-        else 
-          next_state <= RX_RESPONSE;
-        end if;
-      when RX_RESPONSE =>
-      -- Wait for read response. 
-        if curr_response = READ_RESPONSE then
-          next_state <= RX_BODY;
-        else 
-          next_state <= RX_RESPONSE;
-        end if;
-      when RX_BODY =>
-      -- Here we want to stay in RX_BODY for the duration of a packet.
-        if st.read_stage = 0 then
-          next_state <= IDLE;
-        else 
-          next_state <= RX_BODY;
-        end if;
-      when ADDR1 =>
-      -- Transmits the entire address and returns to the appropriate 
-        next_state <= ADDR2;
-      when ADDR2 =>
-        next_state <= ADDR3;
-      when ADDR3 =>
-        next_state <= ADDR4;
-      when ADDR4 => 
-        if st.curr_cmd = WRITE or st.curr_cmd = WRITE_ADD then 
-          next_state <= TX_BODY;
-        else 
-          next_state <= RX_RESPONSE;
-        end if;
-    end case;
-    
-  --- Combinatorial output based on current state ---
-    socbridge_driver_to_ext_data_cmd := (others => '0');
-    socbridge_driver_to_buffer.is_full_out <= '1';
-    socbridge_driver_to_buffer.write_enable_in <= '0';
-    socbridge_driver_to_buffer.payload <= (others => '0');
-    case st.curr_state is
-      when IDLE => 
-        if st.curr_cmd = WRITE or st.curr_cmd = WRITE_ADD then
-          socbridge_driver_to_ext_data_cmd := get_cmd_bits(st.curr_cmd) & get_size_bits(st.curr_cmd_size);
-        elsif st.curr_cmd = READ or st.curr_cmd = READ_ADD then
-          socbridge_driver_to_ext_data_cmd := get_cmd_bits(st.curr_cmd) & get_size_bits(st.curr_cmd_size);
-        else
-        end if;       
-      when TX_HEADER =>
-        if st.curr_cmd = WRITE_ADD then
-          socbridge_driver_to_ext_data_cmd := st.curr_addr(7 downto 0);
-        else 
-          socbridge_driver_to_ext_data_cmd := buffer_to_socbridge_driver.payload;
-          socbridge_driver_to_buffer.is_full_out <= '0';
-        end if;
-      when TX_BODY =>
-        if st.write_stage > 0 then
-          socbridge_driver_to_buffer.is_full_out <= '0';
-          socbridge_driver_to_ext_data_cmd := buffer_to_socbridge_driver.payload;
-        else 
-          socbridge_driver_to_ext_data_cmd := (others => '0');
-        end if;
-      when TX_ACK =>
-      when RX_HEADER =>
-        if st.curr_cmd = READ_ADD then
-          socbridge_driver_to_ext_data_cmd := st.curr_addr(7 downto 0);
-        end if; 
-      when RX_RESPONSE =>
-      when RX_BODY =>
-        socbridge_driver_to_buffer.payload <= st.ext_to_socbridge_driver_reg.data;
-        socbridge_driver_to_buffer.write_enable_in <= '1';
-      when ADDR1 =>
-        socbridge_driver_to_ext_data_cmd := st.curr_addr(15 downto 8);
-      when ADDR2 =>
-        socbridge_driver_to_ext_data_cmd := st.curr_addr(23 downto 16);
-      when ADDR3 =>
-        socbridge_driver_to_ext_data_cmd := st.curr_addr(31 downto 24);
-      when ADDR4 =>
-        if st.curr_cmd = WRITE_ADD then
-          socbridge_driver_to_buffer.is_full_out <= '0';
-          socbridge_driver_to_ext_data_cmd := buffer_to_socbridge_driver.payload;
-          report integer'image(to_integer(signed(socbridge_driver_to_ext_data_cmd))) & " "&  integer'image(to_integer(signed(buffer_to_socbridge_driver.payload)));
-        end if;
-    end case;
-    next_parity_out <= calc_parity(socbridge_driver_to_ext_data_cmd);
-    --- DEBUG GLOBAL BINDINGS ---
-    -- synthesis translate_off
-    test <= socbridge_driver_to_ext_data_cmd;
-    -- synthesis translate_on
-    --- TRANSLATOR ---
-
-      --- Next state assignment
-    case trans_st.curr_state is
+    --- Next State Assignments --- 
+      --- ### TX NEXT STATE ASSIGNMENTS ### ---
+    case st.tx_state is
       when IDLE =>
-        if trans_st.curr_inst.request = '1' then
-          trans_next_state <= SEND;
+        if (local_next_tx_transaction = WRITE or local_next_tx_transaction = WRITE_ADD) and not st.write_in_flight then
+          next_tx_state <= TX_HEADER;
+        elsif (local_next_tx_transaction = READ or local_next_tx_transaction = READ_ADD) and not st.read_in_flight then
+          next_tx_state <= TX_HEADER;
+        elsif local_next_tx_transaction = READ_RESPONSE or local_next_tx_transaction = WRITE_ACK then
+          next_tx_state <= TX_HEADER;
         else 
-          trans_next_state <= IDLE;
+          next_tx_state <= IDLE;
+        end if;
+      when TX_HEADER =>
+        -- Commands
+        if st.tx_transaction = WRITE_ADD or st.tx_transaction = READ_ADD then
+          next_tx_state <= ADDR1;
+        elsif st.tx_transaction = WRITE then 
+          next_tx_state <= TX_W_BODY;
+        elsif st.tx_transaction = READ then
+          next_tx_state <= IDLE;
+        -- Responses
+        elsif st.tx_transaction = READ_RESPONSE then
+          next_tx_state <= TX_R_BODY;
+        else
+          next_tx_state <= IDLE;
+        end if;
+      when TX_R_BODY =>
+        if st.tx_stage <= 1 then
+          next_tx_state <= IDLE;
+        else 
+          next_tx_state <= TX_R_BODY;
+        end if;
+      when ADDR1 =>
+        next_tx_state <= ADDR2;
+      when ADDR2 =>
+        next_tx_state <= ADDR3;
+      when ADDR3 =>
+        next_tx_state <= ADDR4;
+      when ADDR4 => 
+        if st.tx_transaction = READ_ADD then 
+          next_tx_state <= IDLE;
+        elsif st.tx_transaction = WRITE_ADD then 
+          next_tx_state <= TX_W_BODY;
+        else 
+          next_tx_state <= IDLE;
+        end if;
+      when TX_W_BODY =>
+        if st.tx_stage <= 1 then
+          next_tx_state <= IDLE;
+        else 
+          next_tx_state <= TX_W_BODY;
+        end if;
+    end case;
+  --- Next State Assignment Of RX FSM --- 
+    case st.rx_state is
+      when IDLE => 
+        if local_next_rx_transaction /= NO_OP then 
+          next_rx_state <= RX_HEADER;
+        else
+          next_rx_state <= IDLE;
+        end if;
+      when RX_HEADER =>
+        -- Commands
+        if st.rx_transaction = WRITE_ADD or st.rx_transaction = READ_ADD then
+          next_rx_state <= ADDR1;
+        elsif st.rx_transaction = WRITE then 
+          next_rx_state <= RX_W_BODY;
+        elsif st.rx_transaction = READ then
+          next_rx_state <= RX_AWAIT;
+        -- Responses
+        elsif st.rx_transaction = READ_RESPONSE then
+          next_rx_state <= RX_R_BODY;
+        elsif local_next_rx_transaction /= NO_OP then
+          next_rx_state <= RX_HEADER;
+        else
+          next_rx_state <= IDLE;
+        end if;
+      when RX_R_BODY =>
+        if st.rx_stage <= 1 then
+          if local_next_rx_transaction /= NO_OP then
+            next_rx_state <= RX_HEADER;
+          else
+            next_rx_state <= IDLE;
+          end if;
+        else
+          next_rx_state <= RX_R_BODY;
+        end if;
+      when ADDR1 =>
+        next_rx_state <= ADDR2;
+      when ADDR2 =>
+        next_rx_state <= ADDR3;
+      when ADDR3 =>
+        next_rx_state <= ADDR4;
+      when ADDR4 =>
+        if st.rx_transaction = READ_ADD then 
+          next_rx_state <= RX_AWAIT;
+        elsif st.rx_transaction = WRITE_ADD then
+          next_rx_state <= RX_W_BODY;
+        else
+          next_rx_state <= IDLE; -- Potentially superfluous safety
+        end if;
+      when RX_W_BODY => 
+        if st.rx_stage <= 1 then
+          next_rx_state <= RX_AWAIT;
+        else
+          next_rx_state <= RX_W_BODY;
+        end if;
+      when RX_AWAIT =>
+        -- Wait for TX FSM to send a response
+        if (st.rx_transaction = WRITE_ADD or st.rx_transaction = WRITE)
+        and st.tx_transaction = WRITE_ACK then
+          next_rx_state <= IDLE;
+        elsif (st.rx_transaction = READ_ADD or st.rx_transaction = READ)
+        and st.tx_transaction = READ_RESPONSE and st.tx_stage = 1 then
+          next_rx_state <= IDLE;
+        else 
+          next_rx_state <= RX_AWAIT;
+        end if;
+    end case;
+
+
+  --- Combinatorial output based on current state ---
+    local_next_data_out := (others => '0');
+    socbridge_driver_to_ip.ready <= '0';
+    --- ### TX_STATE BASED OUTPUT ### ---
+    case st.tx_state is
+      when IDLE => 
+      when TX_HEADER =>
+        if st.tx_transaction = WRITE_ACK or st.tx_transaction = READ_RESPONSE then
+          local_next_data_out := get_header_bits(st.tx_transaction, st.rx_transaction) & get_size_bits(st.rx_data_size);
+        else 
+          local_next_data_out := get_header_bits(st.tx_transaction, st.rx_transaction) & get_size_bits(st.tx_data_size);
+        end if;
+        if st.tx_transaction = WRITE then
+          socbridge_driver_to_ip.ready <= '1';
+        end if;
+      when TX_W_BODY =>
+        if st.tx_stage /= 1 and st.tx_stage /= 0 then
+          socbridge_driver_to_ip.ready <= '1';
+        end if;
+        if st.tx_stage /= 0 then
+          if ip_to_socbridge_driver.fifo.valid = '1' then
+            local_next_data_out := ip_to_socbridge_driver.fifo.data;
+          else
+            local_next_data_out := (others => '0');
+          end if;
+        end if;
+      when TX_R_BODY =>
+        if st.tx_stage /= 0 then
+          local_next_data_out := st.manager_data(next_slice_32_8_upper(st.tx_stage mod 4) downto next_slice_32_8_lower(st.tx_stage mod 4));
+        end if;
+      when ADDR1 =>
+        local_next_data_out := st.tx_addr(31 downto 24);
+      when ADDR2 =>
+        local_next_data_out := st.tx_addr(23 downto 16);
+      when ADDR3 =>
+        local_next_data_out := st.tx_addr(15 downto 8);
+      when ADDR4 =>
+        local_next_data_out := st.tx_addr(7 downto 0);
+        if st.tx_transaction = WRITE_ADD then
+          socbridge_driver_to_ip.ready <= '1';
+        end if;
+    end case;
+    --- ### RX_STATE BASED OUTPUT ### ---
+    socbridge_driver_to_manager.valid <= '0';
+    socbridge_driver_to_manager.data <= st.manager_data;
+    socbridge_driver_to_manager.address <= st.manager_addr;
+    socbridge_driver_to_ip.valid <= '0';
+    socbridge_driver_to_ip.data <= st.ext_to_socbridge_driver_reg.data;
+    case st.rx_state is
+      when RX_W_BODY =>
+        if st.rx_stage  mod 4 = 0 and st.rx_stage /= st.rx_data_size then
+          socbridge_driver_to_manager.valid <= '1';
+        end if;
+      when RX_R_BODY =>
+        socbridge_driver_to_ip.valid <= '1';
+      when RX_AWAIT =>
+        if st.rx_transaction = WRITE or st.rx_transaction = WRITE_ADD then
+          socbridge_driver_to_manager.valid <= '1';
+        end if;
+      when others =>
+    end case;
+    next_parity_out <= calc_parity(local_next_data_out);
+    --- TRANSLATOR ---
+      --- Next state assignment
+    case trans_st.write.state is
+      when IDLE =>
+        if st.rx_transaction = READ or st.rx_transaction = READ_ADD
+        or st.rx_transaction = WRITE or st.rx_transaction = WRITE_ADD then
+          trans_write_next_state <= IDLE;
+        elsif trans_st.write.inst.request = '1' and (ip_to_socbridge_driver.fifo.used_slots >= MAX_PKT_SIZE 
+          or ip_to_socbridge_driver.flush = '1') then
+          trans_write_next_state <= SEND;
+        else 
+          trans_write_next_state <= IDLE;
         end if;
       -- Wait for driver to go idle and send next instruction. Then enter AWAIT
       when SEND =>
-        if st.curr_state /= IDLE then
-          trans_next_state <= SEND_ACCEPTED;
+        if st.tx_transaction = WRITE or st.tx_transaction = WRITE_ADD then
+          trans_write_next_state <= SEND_ACCEPTED;
         else 
-          trans_next_state <= SEND;
+          trans_write_next_state <= SEND;
         end if;
       -- Transisitonal state to decrement counter in transition between SEND and AWAIT.
       when SEND_ACCEPTED => 
-        trans_next_state <= AWAIT;
+        trans_write_next_state <= AWAIT;
       -- Wait for driver to finish current instruction, then reenter SEND
       when AWAIT =>
-        if trans_st.curr_inst.seq_mem_access_count <= 0 and st.curr_state = IDLE then
-          trans_next_state <= IDLE;
-        elsif st.curr_state = IDLE then
-          trans_next_state <= SEND;
+        if trans_st.write.inst.access_count = MAX_PKT_SIZE and not st.write_in_flight then
+          trans_write_next_state <= IDLE;
+        elsif trans_st.write.inst.access_count = 0 and not st.write_in_flight then
+          trans_write_next_state <= IDLE;
+        elsif ip_to_socbridge_driver.fifo.used_slots = 0 and ip_to_socbridge_driver.flush = '1'
+              and not st.write_in_flight then
+          trans_write_next_state <= IDLE;
+        elsif not st.write_in_flight and (ip_to_socbridge_driver.fifo.used_slots >= MAX_PKT_SIZE
+          or ip_to_socbridge_driver.flush = '1') then
+          trans_write_next_state <= SEND;
         else 
-          trans_next_state <= AWAIT;
+          trans_write_next_state <= AWAIT;
+        end if;
+    end case;
+    case trans_st.read.state is
+      when IDLE =>
+        if next_rx_transaction = READ or next_rx_transaction = READ_ADD
+        or next_rx_transaction = WRITE or next_rx_transaction = WRITE_ADD then
+          trans_read_next_state <= IDLE;
+        elsif st.rx_transaction = READ or st.rx_transaction = READ_ADD
+        or st.rx_transaction = WRITE or st.rx_transaction = WRITE_ADD then
+          trans_read_next_state <= IDLE;
+        elsif trans_st.read.inst.request = '1' and ip_to_socbridge_driver.read_fifo.used_slots < BUFFER_SIZE - 2*MAX_PKT_SIZE  then
+          trans_read_next_state <= SEND;
+        else 
+          trans_read_next_state <= IDLE;
+        end if;
+      -- Wait for driver to go idle and send next instruction. Then enter AWAIT
+      when SEND =>
+        if st.tx_transaction = READ or st.tx_transaction = READ_ADD then
+          trans_read_next_state <= SEND_ACCEPTED;
+        else 
+          trans_read_next_state <= SEND;
+        end if;
+      -- Transisitonal state to decrement counter in transition between SEND and AWAIT.
+      when SEND_ACCEPTED => 
+        trans_read_next_state <= AWAIT;
+      -- Wait for driver to finish current instruction, then reenter SEND
+      when AWAIT =>
+        if trans_st.read.inst.access_count = 0 and not st.read_in_flight then
+          trans_read_next_state <= IDLE;
+        elsif ip_to_socbridge_driver.flush = '1'and not st.read_in_flight then
+          trans_read_next_state <= IDLE;
+        elsif not st.read_in_flight and ip_to_socbridge_driver.read_fifo.used_slots < BUFFER_SIZE - 2*MAX_PKT_SIZE then
+          trans_read_next_state <= SEND;
+        else 
+          trans_read_next_state <= AWAIT;
         end if;
     end case;
 
-      --- Combinatorial output based on state
-    next_cmd <= NO_OP;
-    next_cmd_size <= 0;
-    case trans_st.curr_state is
-      when IDLE =>
-      when SEND =>
-        if trans_st.is_first_word = '1' then 
-          if trans_st.curr_inst.instruction = READ then
-            next_cmd <= READ_ADD;
-          elsif trans_st.curr_inst.instruction = WRITE then
-            next_cmd <= WRITE_ADD;
-          end if;
-        else 
-          if trans_st.curr_inst.instruction = READ then
-            next_cmd <= READ;
-          elsif trans_st.curr_inst.instruction = WRITE then
-            next_cmd <= WRITE;
-          end if;
-        end if;
-
-        if trans_st.curr_inst.seq_mem_access_count > 128 then
-          next_cmd_size <= 128;
-        elsif trans_st.curr_inst.seq_mem_access_count > 0 then
-          next_cmd_size <= trans_st.curr_inst.seq_mem_access_count;
-        else 
-          next_cmd_size <= 0;
-        end if;
-      when others =>
-      end case;
+    --- NEXT TX TRANSACTION ---
+    local_next_tx_transaction := NO_OP;
+    next_tx_data_size <= 0;
+    if trans_st.read.state = IDLE and trans_st.write.state = IDLE and st.rx_state = RX_AWAIT then
+      if (st.rx_transaction = WRITE or st.rx_transaction = WRITE_ADD) and manager_to_socbridge_driver.ready = '1' then
+        local_next_tx_transaction := WRITE_ACK;
+      elsif (st.rx_transaction = READ or st.rx_transaction = READ_ADD) and manager_to_socbridge_driver.valid = '1' then
+        next_tx_data_size <= st.rx_data_size;
+        local_next_tx_transaction := READ_RESPONSE;
+      end if;
+    elsif trans_st.read.state = SEND 
+    and not ((st.last_sent_transaction = READ or st.last_sent_transaction = READ_ADD) and trans_st.write.state = SEND) then
+      if trans_st.read.is_first_word = '1' then 
+        local_next_tx_transaction := READ_ADD;
+      else 
+        local_next_tx_transaction := READ;
+      end if;
+      if trans_st.read.inst.access_count /= MAX_PKT_SIZE then
+        next_tx_data_size <= MAX_PKT_SIZE;
+      else
+        next_tx_data_size <= trans_st.read.inst.access_count;
+      end if;
+    elsif trans_st.write.state = SEND and not st.read_in_flight then
+      if trans_st.write.is_first_word = '1' then 
+        local_next_tx_transaction := WRITE_ADD;
+      else
+        local_next_tx_transaction := WRITE;
+      end if;
+      if trans_st.write.inst.access_count /= MAX_PKT_SIZE then
+        next_tx_data_size <= MAX_PKT_SIZE;
+      else 
+        next_tx_data_size <= trans_st.write.inst.access_count;
+      end if;
+    end if;
 
+    next_tx_transaction <= local_next_tx_transaction;
+    next_rx_transaction <= local_next_rx_transaction;
+    next_data_out <= local_next_data_out;
   end process comb_proc;
   -- Process updating internal registers based on primary clock
-  seq_proc: process(ext_to_socbridge_driver_rec.clk, rst, clk)
+  seq_proc: process(ext_to_socbridge_driver.control(1), rst, clk)
   begin
     if(rst = '1') then
-      st.ext_to_socbridge_driver_reg.data <= (others => '0');
-      st.socbridge_driver_to_ext_reg.data <= (others => '0');
-      st.socbridge_driver_to_ext_reg.clk <= '0';
-      st.socbridge_driver_to_ext_reg.parity <= '1';
-      st.curr_state <= IDLE;
-      st.write_stage <= 0;
-      st.read_stage <= 0;
-      st.curr_cmd <= NO_OP;
-      st.curr_cmd_size <= 0;
-      st.curr_addr <= (others => '0');
-
-    elsif(rising_edge(ext_to_socbridge_driver_rec.clk)) then
-      st.ext_to_socbridge_driver_reg.data <= ext_to_socbridge_driver_rec.data;
-      st.ext_to_socbridge_driver_reg.clk <= ext_to_socbridge_driver_rec.clk;
-      st.ext_to_socbridge_driver_reg.parity <= ext_to_socbridge_driver_rec.parity;
-      st.socbridge_driver_to_ext_reg.data <= socbridge_driver_to_ext_data_cmd;
+      st <= st_reset_vec;
+    elsif(rising_edge(ext_to_socbridge_driver.control(1))) then
+      st.ext_to_socbridge_driver_reg.data <= ext_to_socbridge_driver.payload;
+      -- PARITY CHECK NOT IMPLEMENTED, REMOVING
+      --st.ext_to_socbridge_driver_reg.parity <= ext_to_socbridge_driver_rec.parity;
+      st.socbridge_driver_to_ext_reg.data <= next_data_out;
       st.socbridge_driver_to_ext_reg.clk <= not st.socbridge_driver_to_ext_reg.clk;
       st.socbridge_driver_to_ext_reg.parity <= next_parity_out; 
-      st.curr_state <= next_state;
-      case st.curr_state is
+      st.tx_state <= next_tx_state;
+      st.rx_state <= next_rx_state;
+      case st.tx_state is
         when IDLE =>
-          st.curr_cmd <= next_cmd;   
-          st.curr_cmd_size <= next_cmd_size;
-          st.curr_addr <= trans_st.curr_inst.address;
-          if next_cmd_size > 0 then
-            st.write_stage <= next_cmd_size - 1;
-            st.read_stage <= next_cmd_size - 1;
+          if ip_to_socbridge_driver.flush = '1' then
+            st.last_sent_transaction <= NO_OP;
+          end if;
+          if (next_tx_transaction = WRITE or next_tx_transaction = WRITE_ADD
+          or next_tx_transaction = READ or next_tx_transaction = READ_ADD) then
+            if not st.read_in_flight or not st.write_in_flight then
+              st.tx_transaction <= next_tx_transaction;   
+              st.tx_data_size <= next_tx_data_size;
+            else 
+              st.tx_transaction <= NO_OP;   
+              st.tx_data_size <= 0;
+            end if;
+          else
+            st.tx_transaction <= next_tx_transaction;   
+            st.tx_data_size <= next_tx_data_size;
+          end if;
+          if next_tx_transaction = WRITE_ADD or next_tx_transaction = WRITE
+          or next_tx_transaction = READ_RESPONSE then
+            st.tx_addr <= trans_st.write.inst.address;
+            st.tx_stage <= next_tx_data_size;
+          else
+            st.tx_addr <= trans_st.read.inst.address;
+            st.tx_stage <= 0;
           end if;
         when TX_HEADER =>
-        when TX_BODY =>
-          if st.write_stage > 0 then
-            st.write_stage <= st.write_stage - 1;
+          if st.tx_transaction = WRITE or st.tx_transaction = WRITE_ADD then
+            st.last_sent_transaction <= st.tx_transaction;
+            if not (st.rx_state = RX_HEADER and st.rx_transaction = WRITE_ACK) then
+              st.write_in_flight <= true;
+            end if;
+          elsif st.tx_transaction = READ or st.tx_transaction = READ_ADD then
+            st.last_sent_transaction <= st.tx_transaction;
+            if not (st.rx_state = RX_HEADER and st.rx_transaction = READ_RESPONSE) then
+              st.read_in_flight <= true;
+            end if;
           end if;
-        when TX_ACK => 
-          st.curr_cmd <= NO_OP;
-          st.curr_cmd_size <= 0;
-        when RX_HEADER =>
-        when RX_BODY =>
-          if st.read_stage > 0 then
-            st.read_stage <= st.read_stage - 1;
+        when TX_W_BODY =>
+          if st.tx_stage /= 0 then
+            st.tx_stage <= st.tx_stage - 1;
+          end if;
+        when TX_R_BODY =>
+          if st.tx_stage /= 0 then
+            st.tx_stage <= st.tx_stage - 1;
+          end if;
+        when others => 
+      end case;
+      case st.rx_state is
+        when IDLE =>
+          st.rx_transaction <= next_rx_transaction;   
+          st.rx_data_size <= next_rx_data_size;
+          if next_rx_transaction = WRITE_ADD or next_rx_transaction = WRITE
+          or next_rx_transaction = READ_RESPONSE then
+            st.rx_stage <= next_rx_data_size;
+          else
+            st.rx_stage <= 0;
+          end if;
+        when RX_HEADER => 
+          if st.rx_transaction = WRITE_ACK then
+            if not (st.tx_state = TX_HEADER and (st.tx_transaction = WRITE or st.tx_transaction = WRITE_ADD)) then
+              st.write_in_flight <= false;
+            end if;
+            if next_rx_transaction /= NO_OP then
+              st.rx_transaction <= next_rx_transaction;   
+              st.rx_data_size <= next_rx_data_size;
+              if next_rx_transaction = WRITE_ADD or next_rx_transaction = WRITE then
+                st.manager_first_word <= true;
+              end if;
+              if next_rx_transaction = WRITE_ADD or next_rx_transaction = WRITE
+              or next_rx_transaction = READ_RESPONSE then
+                st.rx_stage <= next_rx_data_size;
+              else
+                st.rx_stage <= 0;
+              end if;
+            end if;
+          elsif st.rx_transaction = READ_RESPONSE then
+            if not (st.tx_state = TX_HEADER and (st.tx_transaction = READ or st.tx_transaction = READ_ADD)) then
+              st.read_in_flight <= false;
+            end if;
+          end if;
+        when RX_R_BODY =>
+          if st.rx_stage /= 0 then
+            st.rx_stage <= st.rx_stage - 1;
+          end if;
+          if next_rx_transaction /= NO_OP and st.rx_stage <= 1 then
+            st.rx_transaction <= next_rx_transaction;   
+            st.rx_data_size <= next_rx_data_size;
+            if next_rx_transaction = WRITE_ADD or next_rx_transaction = WRITE
+            or next_rx_transaction = READ_RESPONSE then
+              st.rx_stage <= next_rx_data_size;
+            else
+              st.rx_stage <= 0;
+            end if;
+          end if;
+        when RX_W_BODY =>
+          if st.rx_stage /= 0 then
+            st.rx_stage <= st.rx_stage - 1;
+            st.manager_data(next_slice_32_8_upper(st.rx_stage mod 4) downto next_slice_32_8_lower(st.rx_stage mod 4)) <= st.ext_to_socbridge_driver_reg.data;
+          end if;
+          if st.rx_stage mod 4 = 2 then
+            if st.manager_first_word then
+              st.manager_first_word <= false;
+            else
+              st.manager_addr <= std_logic_vector(to_unsigned(to_integer(unsigned(st.manager_addr) + 4), 32));
+            end if;
+          end if;
+        when RX_AWAIT =>
+          st.manager_data <= manager_to_socbridge_driver.data;
+          if st.tx_transaction = READ_RESPONSE or st.tx_transaction = WRITE_ACK then
+            if (st.rx_transaction = READ or st.rx_transaction = READ_ADD) and st.tx_stage mod 4 = 2 then
+              st.manager_addr <= std_logic_vector(to_unsigned(to_integer(unsigned(st.manager_addr) + 4), 32));
+            end if;
+          end if;
+        when ADDR1 =>
+          if st.rx_transaction = READ_ADD then
+            st.manager_addr(31 downto 24) <= st.ext_to_socbridge_driver_reg.data;
           else 
-            st.curr_cmd <= NO_OP;
-            st.curr_cmd_size <= 0;
+            st.manager_addr(31 downto 24) <= st.ext_to_socbridge_driver_reg.data;
+          end if;
+        when ADDR2 =>
+          if st.rx_transaction = READ_ADD then
+            st.manager_addr(23 downto 16) <= st.ext_to_socbridge_driver_reg.data;
+          else 
+            st.manager_addr(23 downto 16) <= st.ext_to_socbridge_driver_reg.data;
+          end if;
+        when ADDR3 =>
+          if st.rx_transaction = READ_ADD then
+            st.manager_addr(15 downto 8) <= st.ext_to_socbridge_driver_reg.data;
+          else 
+            st.manager_addr(15 downto 8) <= st.ext_to_socbridge_driver_reg.data;
+          end if;
+        when ADDR4 =>
+          if st.rx_transaction = READ_ADD then
+            st.manager_addr(7 downto 0) <= st.ext_to_socbridge_driver_reg.data;
+          else 
+            st.manager_addr(7 downto 0) <= st.ext_to_socbridge_driver_reg.data;
           end if;
-
         when others => 
       end case;
     end if;
@@ -364,32 +558,81 @@ begin
     --- TRANSLATOR ---
 
     if(rst = '1') then
-      trans_st.curr_state <= IDLE;
-      trans_st.curr_inst.request <= '0';
-      trans_st.curr_inst.address <= (others => '0');
-      trans_st.curr_inst.seq_mem_access_count <= 0;
-      trans_st.curr_inst.instruction <= NO_OP;
-      trans_st.is_first_word <= '1';
-    elsif(rising_edge(clk)) then
-      trans_st.curr_state <= trans_next_state;
-      case trans_st.curr_state is
+      trans_st <= translator_reset_vec;
+    elsif(rising_edge(ext_to_socbridge_driver.control(1))) then
+      trans_st.read.state <= trans_read_next_state;
+      trans_st.write.state <= trans_write_next_state;
+      case trans_st.write.state is
         when IDLE =>
-          if controller_to_socbridge_driver.request = '1' then
-            trans_st.curr_inst <= controller_to_socbridge_driver;
+          if controller_to_socbridge_driver.request = '1' and controller_to_socbridge_driver.instruction = WRITE 
+             and trans_st.write.inst.request = '0' then
+            trans_st.write.inst.request <= controller_to_socbridge_driver.request;
+            trans_st.write.inst.address <= controller_to_socbridge_driver.address;
+            trans_st.write.inst.access_count <= controller_to_socbridge_driver.seq_mem_access_count;
           else 
           end if;
-          trans_st.is_first_word <= '1';
+          trans_st.write.is_first_word <= '1';
         when SEND =>
-        when SEND_ACCEPTED => 
-          trans_st.curr_inst.seq_mem_access_count <= trans_st.curr_inst.seq_mem_access_count - 128;
-        when AWAIT =>
-          if trans_st.curr_inst.seq_mem_access_count <= 0 and st.curr_state = IDLE then
-            trans_st.curr_inst.request <= '0';
-            trans_st.curr_inst.address <= (others => '0');
-            trans_st.curr_inst.seq_mem_access_count <= 0;
-            trans_st.curr_inst.instruction <= NO_OP;
+          if trans_st.write.inst.access_count mod 256 = 0 then
+            trans_st.write.is_first_word <= '1';
+          elsif st.last_sent_transaction = READ or st.last_sent_transaction = READ_ADD 
+          or next_tx_transaction = READ or next_tx_transaction = READ_ADD then
+            trans_st.write.is_first_word <= '1';
+          else 
+            trans_st.write.is_first_word <= '0';
+          end if;
+        when SEND_ACCEPTED => 
+          trans_st.write.inst.access_count <= trans_st.write.inst.access_count - MAX_PKT_SIZE;
+          trans_st.write.inst.address <= std_logic_vector(unsigned(trans_st.write.inst.address) + MAX_PKT_SIZE);
+        when AWAIT =>
+          if  ((ip_to_socbridge_driver.fifo.used_slots = 0 and ip_to_socbridge_driver.flush = '1') 
+              or trans_st.write.inst.access_count <= 0) 
+              and st.tx_state = TX_W_BODY then
+            trans_st.write.inst <= ctrl_inst_reset_vec;
+          end if;
+          if trans_st.write.inst.access_count mod 256 = 0 then
+            trans_st.write.is_first_word <= '1';
+          elsif st.last_sent_transaction = READ or st.last_sent_transaction = READ_ADD 
+          or next_tx_transaction = READ or next_tx_transaction = READ_ADD then
+            trans_st.write.is_first_word <= '1';
+          else 
+            trans_st.write.is_first_word <= '0';
+          end if;
+        when others =>
+      end case;
+      case trans_st.read.state is
+        when IDLE =>
+          if controller_to_socbridge_driver.request = '1' and controller_to_socbridge_driver.instruction = READ then
+            trans_st.read.inst.request <= controller_to_socbridge_driver.request;
+            trans_st.read.inst.address <= controller_to_socbridge_driver.address;
+            trans_st.read.inst.access_count <= controller_to_socbridge_driver.seq_mem_access_count;
+          else 
+          end if;
+          trans_st.read.is_first_word <= '1';
+        when SEND =>
+          if trans_st.read.inst.access_count mod 256 = 0 then
+            trans_st.read.is_first_word <= '1';
+          elsif st.last_sent_transaction = WRITE or st.last_sent_transaction = WRITE_ADD
+          or next_tx_transaction = WRITE or next_tx_transaction = WRITE_ADD then
+            trans_st.read.is_first_word <= '1';
+          else 
+            trans_st.read.is_first_word <= '0';
+          end if;
+        when SEND_ACCEPTED => 
+          trans_st.read.inst.access_count <= trans_st.read.inst.access_count - MAX_PKT_SIZE;
+          trans_st.read.inst.address <= std_logic_vector(unsigned(trans_st.read.inst.address) + MAX_PKT_SIZE);
+        when AWAIT =>
+          if (ip_to_socbridge_driver.flush = '1' or trans_st.read.inst.access_count <= 0) and st.tx_state = IDLE then
+            trans_st.read.inst <= ctrl_inst_reset_vec;
+          end if;
+          if trans_st.read.inst.access_count mod 256 = 0 then
+            trans_st.read.is_first_word <= '1';
+          elsif st.last_sent_transaction = WRITE or st.last_sent_transaction = WRITE_ADD
+          or next_tx_transaction = WRITE or next_tx_transaction = WRITE_ADD then
+            trans_st.read.is_first_word <= '1';
+          else 
+            trans_st.read.is_first_word <= '0';
           end if;
-          trans_st.is_first_word <= '0';
         when others =>
       end case;
     end if;

src/socbridge/socbridge_driver_pkg.vhd

@@ -0,0 +1,222 @@
+library IEEE;
+use IEEE.std_logic_1164.all;
+use IEEE.numeric_std.all;
+use IEEE.MATH_REAL.all;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
+
+
+package socbridge_driver_pkg is
+  subtype command_size_t is integer range 0 to 128;
+  constant MAX_IN_FLIGHT : integer := 1;
+
+  type transaction_t is
+    (NO_OP, WRITE_ADD, WRITE, READ_ADD, READ, P_ERR, WRITE_ACK, READ_RESPONSE);
+
+  type rx_state_t is
+    (IDLE, ADDR1, ADDR2, ADDR3, ADDR4, RX_AWAIT,
+     RX_R_BODY, RX_HEADER, RX_W_BODY);
+
+  type tx_state_t is
+    (IDLE, ADDR1, ADDR2, ADDR3, ADDR4, 
+     TX_HEADER, TX_W_BODY, TX_R_BODY);
+  --- TRANSLATOR ---
+  type ctrl_inst_state_t is (IDLE, SEND, SEND_ACCEPTED, AWAIT);
+
+  type ctrl_inst_t is record
+    request              : std_logic;
+    address              : std_logic_vector(address_width - 1 downto 0);
+    access_count         : natural range 0 to 2**25;
+  end record ctrl_inst_t;
+
+  type ctrl_inst_state_rec_t is record
+    inst : ctrl_inst_t;
+    state : ctrl_inst_state_t;
+    is_first_word : std_logic;
+  end record ctrl_inst_state_rec_t;
+
+  type translator_state_t is record
+    read: ctrl_inst_state_rec_t;
+    write: ctrl_inst_state_rec_t;
+  end record translator_state_t;
+
+  type ext_protocol_t is record
+    data   : std_logic_vector(interface_inst.socbridge.payload_width - 1 downto 0);
+    clk    : std_logic;
+    parity : std_logic;
+  end record ext_protocol_t;
+
+  type state_rec_t is record
+    rx_transaction : transaction_t;
+    tx_transaction : transaction_t;
+    rx_state: rx_state_t;
+    tx_state: tx_state_t;
+    ext_to_socbridge_driver_reg, socbridge_driver_to_ext_reg : ext_protocol_t; 
+    tx_stage, rx_stage : NATURAL range 0 to 2**25;
+    tx_data_size, rx_data_size : integer range 0 to 2**25;
+    tx_addr : std_logic_vector(31 downto 0);
+    read_in_flight : boolean;
+    write_in_flight : boolean;
+    last_sent_transaction : transaction_t;
+    manager_addr : std_logic_vector(31 downto 0);
+    manager_data : std_logic_vector(31 downto 0);
+    manager_first_word: boolean;
+  end record state_rec_t;
+  impure function calc_parity(
+    d : STD_LOGIC_VECTOR(interface_inst.socbridge.payload_width - 1 downto 0)
+  ) return std_logic;
+  pure function create_io_type_out_from_ext_protocol(
+  input: ext_protocol_t
+  ) return socbridge_driver_to_ext_t;
+  function to_string ( a: std_logic_vector) return string;
+  pure function get_header_bits(transaction : transaction_t; caused_by: transaction_t) return std_logic_vector;
+  pure function get_size_bits(size : command_size_t) return std_logic_vector;
+  pure function get_size_bits_sim(size : command_size_t) return std_logic_vector;
+  
+  constant ctrl_inst_reset_vec : ctrl_inst_t := (
+    request => '0',
+    address => (others => '0'),
+    access_count => 0
+  );
+
+  constant translator_reset_vec : translator_state_t := (
+      read => (
+        state => IDLE,
+        inst => ctrl_inst_reset_vec,
+        is_first_word => '1'
+    ),
+    write => (
+        state => IDLE,
+        inst => ctrl_inst_reset_vec,
+        is_first_word => '1'
+    )
+  );
+
+  constant ext_protocol_reset_vec : ext_protocol_t := (
+    data => (others => '0'),
+    clk  => '0',
+    parity => '1'
+  );
+
+  constant st_reset_vec : state_rec_t := (
+    ext_to_socbridge_driver_reg => ext_protocol_reset_vec,
+    socbridge_driver_to_ext_reg => ext_protocol_reset_vec,
+    tx_state => IDLE,
+    rx_state => IDLE,
+    tx_stage => 0,
+    rx_stage => 0,
+    tx_transaction => NO_OP,
+    rx_transaction => NO_OP,
+    tx_data_size => 0,
+    rx_data_size => 0,
+    tx_addr => (others => '0'),
+    manager_addr => (others => '0'),
+    manager_data => (others => '0'),
+    manager_first_word => true,
+    read_in_flight  => false,
+    write_in_flight => false,
+    last_sent_transaction => NO_OP
+  );
+
+end package socbridge_driver_pkg;
+
+package body socbridge_driver_pkg is
+  function to_string ( a: std_logic_vector) return string is
+  variable b : string (1 to a'length) := (others => NUL);
+  variable stri : integer := 1; 
+  begin
+      for i in a'range loop
+          b(stri) := std_logic'image(a((i)))(2);
+      stri := stri+1;
+      end loop;
+  return b;
+  end function;
+  
+  impure function calc_parity(
+    d : STD_LOGIC_VECTOR(interface_inst.socbridge.payload_width - 1 downto 0)
+  ) return std_logic is
+  variable parity : std_logic;
+  begin
+    parity := d(0);
+    for x in integer'(1) to d'length - 1 loop
+      parity := parity xor d(x);
+    end loop;
+    return not parity;
+  end function;
+
+  
+  
+  pure function create_io_type_out_from_ext_protocol(
+    input : ext_protocol_t
+  ) return socbridge_driver_to_ext_t is
+  variable val : socbridge_driver_to_ext_t;
+  begin
+    val.payload:= input.data;
+    val.control(1) := input.clk;
+    val.control(0) := input.parity;
+    return val;
+  end function;
+
+  pure function get_header_bits(transaction : transaction_t; caused_by : transaction_t) 
+    return std_logic_vector is
+  variable val : std_logic_vector(4 downto 0);
+  begin
+    val := "11111";
+    if transaction = NO_OP then
+    val := "00000";
+    elsif transaction = WRITE_ADD then
+    val := "10000";
+    elsif transaction = WRITE then
+    val := "10100";
+    elsif transaction = READ_ADD then
+    val := "11000";
+    elsif transaction = READ then
+    val := "11100";
+    elsif transaction = WRITE_ACK and caused_by = WRITE then
+    val := "00101";
+    elsif transaction = WRITE_ACK and caused_by = WRITE_ADD then
+    val := "00001";
+    elsif transaction = READ_RESPONSE and caused_by = READ then
+    val := "01100";
+    elsif transaction = READ_RESPONSE and caused_by = READ_ADD then
+    val := "01000";
+    elsif transaction = P_ERR then
+    val := "01001";
+    end if;
+    return val;
+  end function;
+  
+  
+  pure function get_size_bits(size: command_size_t) 
+    return std_logic_vector is
+  variable val : std_logic_vector(2 downto 0);
+  begin
+    if size > 2**6 then
+      val := "111";
+    elsif size > 2**5 then
+      val := "110";
+    elsif size > 2**4 then
+      val := "101";
+    elsif size > 2**3 then
+      val := "100";
+    elsif size > 2**2 then
+      val := "011";
+    elsif size > 2**1 then
+      val := "010";
+    elsif size > 2**0 then
+      val := "001";
+    elsif size >= 0 then
+      val := "000";
+    end if;
+    return val;
+  end function;
+  pure function get_size_bits_sim(size: command_size_t) 
+    return std_logic_vector is
+  variable pow : integer;
+  variable val : std_logic_vector(2 downto 0);
+  begin
+    pow := integer(CEIL(sqrt(Real(size))));
+    val := std_logic_vector(TO_UNSIGNED(size - 1, 3));
+    return val;
+  end function;
+end package body socbridge_driver_pkg;

src/socbridge/socbridge_driver_tb.vhd

@@ -1,11 +1,10 @@
 library IEEE;
 use IEEE.std_logic_1164.all;
+use ieee.numeric_std.all;
 use IEEE.MATH_REAL.all;
-library work;
-use work.socbridge_driver_tb_pkg.all;
-library ganimede;
-use ganimede.io_types.all;
-library socbridge;
+library gan_ganimede;
+use gan_ganimede.io_types.all;
+library gan_socbridge;
 
 
 entity socbridge_driver_tb is
@@ -14,319 +13,95 @@ end entity socbridge_driver_tb;
 architecture tb of socbridge_driver_tb is
   signal clk : std_logic := '0';
   signal rst : std_logic;
-  signal cmd : command_t;
-  signal address : std_logic_vector(31 downto 0);
-  signal cmd_size : positive;
   signal ext_to_socbridge_driver  :  ext_to_socbridge_driver_t;
   signal socbridge_driver_to_ext :  socbridge_driver_to_ext_t;
-  signal buffer_to_socbridge_driver  :  buffer_to_socbridge_driver_t;
-  signal socbridge_driver_to_buffer :  socbridge_driver_to_buffer_t;
-  signal controller_to_socbridge_driver :  controller_to_socbridge_driver_t;
-  signal socbridge_driver_controller :  socbridge_driver_to_controller_t;
-  signal curr_word : std_logic_vector(ext_to_socbridge_driver.payload'length - 1 downto 0);
-  signal expected_out : std_logic_vector(socbridge_driver_to_ext.payload'length - 1 downto 0);
+  signal ip_to_socbridge_driver  :  ip_to_socbridge_driver_t;
+  signal socbridge_driver_to_ip :  socbridge_driver_to_ip_t;
+  signal controller_to_socbridge_driver : controller_to_socbridge_driver_t;
+  signal socbridge_driver_to_controller : socbridge_driver_to_controller_t;
+  shared variable done : boolean := FALSE;
   
   constant CLK_PERIOD : TIME := 10 ns;
-  constant SIMULATION_CYCLE_COUNT : INTEGER := 100;
-
-  procedure fail(error_msg : string) is 
-  begin
-    wait for CLK_PERIOD;
-    report "Simulation ending due to: " & error_msg & ". Shutting down..." severity FAILURE;
-  end procedure;
-
-  procedure check_next_state(correct_state: state_t) is
-  begin
-    if(not (correct_state = G_next_state)) then
-      report "Next State is not what was expected, found " & state_t'image(G_next_state)
-            & " but expected " & state_t'image(correct_state) severity error;
-      fail("Next State");
-    end if;
-  end procedure;
-  
-  procedure check_data_out(correct_data: std_logic_vector(socbridge_driver_to_ext.payload'length - 1 downto 0)) is
-  begin
-    if(not (correct_data = socbridge_driver_to_ext.payload)) then
-      report "Data out is not what was expected, found " & to_string(socbridge_driver_to_ext.payload)
-            & " but expected " & to_string(correct_data) severity error;
-      fail("Data out");
-    end if;
-  end procedure;
-
-  procedure check_parity(correct_data: std_logic_vector(socbridge_driver_to_ext.payload'length - 1 downto 0)) is
-  begin
-    if(not (calc_parity(correct_data) = calc_parity(socbridge_driver_to_ext.payload))) then
-      report "Parity out is not what was expected, found " & std_logic'image(calc_parity(socbridge_driver_to_ext.payload))
-            & " but expected " & std_logic'image(calc_parity(correct_data))  severity error;
-      fail("Parity out");
-    end if;
-  end procedure;
-
---  component socbridge_driver is
---    port(
---      clk     : in std_logic;
---      rst     : in std_logic;
---      cmd     : in command_t;
---      address : in std_logic_vector(31 downto 0);
---      cmd_size: in positive;
---      ext_to_socbridge_driver  : in ext_to_socbridge_driver_t;
---      socbridge_driver_to_ext : out socbridge_driver_to_ext_t;
---      buffer_to_socbridge_driver  : out buffer_to_socbridge_driver_t;
---      socbridge_driver_to_buffer : in socbridge_driver_to_buffer_t
---    );
---  end component socbridge_driver;
+  constant MAX_CYCLE_COUNT : INTEGER := 1000000;
 
 begin
-  socbridge_driver_inst: entity socbridge.socbridge_driver
+  socbridge_driver_inst: entity gan_socbridge.socbridge_driver
    port map(
       clk => clk,
       rst => rst,
       controller_to_socbridge_driver => controller_to_socbridge_driver,
-      socbridge_driver_to_controller => socbridge_driver_controller,
+      socbridge_driver_to_controller => socbridge_driver_to_controller,
       ext_to_socbridge_driver => ext_to_socbridge_driver,
       socbridge_driver_to_ext => socbridge_driver_to_ext,
-      buffer_to_socbridge_driver => buffer_to_socbridge_driver,
-      socbridge_driver_to_buffer => socbridge_driver_to_buffer
+      ip_to_socbridge_driver => ip_to_socbridge_driver,
+      socbridge_driver_to_ip => socbridge_driver_to_ip
   );
 
   ext_to_socbridge_driver.control(1) <= clk;
   real_clk_proc: process
+    variable cycle_count :integer := 0;
   begin
-    for x in 0 to SIMULATION_CYCLE_COUNT*2 loop
+    while (not done) and (cycle_count < MAX_CYCLE_COUNT) loop
       clk <= not clk;
       wait for CLK_PERIOD / 2;
     end loop;
     wait;
   end process real_clk_proc;
+
+  reset_proc: process
+  begin
+    rst <= '1';
+    wait for CLK_PERIOD * 3;
+    rst <= '0';
+    wait;
+  end process reset_proc;
   
-  verify_clk: process
-  variable last_clk : std_logic;
-  begin
-    wait for CLK_PERIOD / 2;
-    for x in 0 to SIMULATION_CYCLE_COUNT loop
-      if last_clk = socbridge_driver_to_ext.control(1) then
-        report "Secondary side clk not correct." severity error;
-      end if;
-      last_clk := socbridge_driver_to_ext.control(1);
-      wait for CLK_PERIOD;
-    end loop;
-    wait;
-  end process verify_clk;
-
-  verify_out_signals: process
-  begin
-    wait for CLK_PERIOD / 2;
-    for x in 0 to SIMULATION_CYCLE_COUNT loop
-      check_data_out(expected_out);
-      check_parity(expected_out);
-      wait for CLK_PERIOD;
-    end loop;
-    wait;
-  end process verify_out_signals;
-
-  verify_signals : process
-  begin
-    expected_out <= "00000000";
-    wait for 3 * CLK_PERIOD;
-    wait for CLK_PERIOD / 3;
-    expected_out <= "00000000";
-    check_next_state(IDLE);
-    wait for CLK_PERIOD /4;
-    check_next_state(TX_HEADER);
-    wait for CLK_PERIOD * 3 / 4;
-    expected_out <= get_cmd_bits(WRITE) & get_size_bits_sim(2);
-    check_next_state(TX_BODY);
-    wait for CLK_PERIOD;
-    expected_out <= "00000001";
-    check_next_state(TX_BODY);
-    wait for CLK_PERIOD;
-    expected_out <= "00000010";
-    check_next_state(TX_ACK);
-    wait for CLK_PERIOD;
-    expected_out <= "00000000";
-    check_next_state(TX_ACK);
-    wait for CLK_PERIOD;
-    check_next_state(IDLE);
-    wait for CLK_PERIOD * 6;
-    expected_out <= "00000000";
-    check_next_state(IDLE);
-    wait for CLK_PERIOD /4;
-    check_next_state(TX_HEADER);
-    wait for CLK_PERIOD * 3 / 4;
-    expected_out <= get_cmd_bits(WRITE_ADD) & get_size_bits(2);
-    check_next_state(ADDR1);
-    wait for CLK_PERIOD;
-    expected_out <= x"FA";
-    check_next_state(ADDR2);
-    wait for CLK_PERIOD;
-    expected_out <= x"A0";
-    check_next_state(ADDR3);
-    wait for CLK_PERIOD;
-    expected_out <= x"0F";
-    check_next_state(ADDR4);
-    wait for CLK_PERIOD;
-    expected_out <= x"FA";
-    check_next_state(TX_BODY);
-    wait for CLK_PERIOD;
-    expected_out <= "00000100";
-    check_next_state(TX_BODY);
-    wait for CLK_PERIOD;
-    expected_out <= "00001000";
-    check_next_state(TX_ACK);
-    wait for CLK_PERIOD;
-    expected_out <= "00000000";
-    check_next_state(TX_ACK);
-    wait for CLK_PERIOD;
-    expected_out <= "00000000";
-    check_next_state(IDLE);
-    wait for CLK_PERIOD * 2;
-    wait for CLK_PERIOD /4;
-    check_next_state(RX_HEADER);
-    wait for CLK_PERIOD * 3 / 4;
-    expected_out <= get_cmd_bits(READ) & get_size_bits(2);
-    check_next_state(RX_RESPONSE);
-    wait for CLK_PERIOD;
-    expected_out <= "00000000";
-    check_next_state(RX_RESPONSE);
-    wait for CLK_PERIOD;
-    check_next_state(RX_BODY);
-    wait for CLK_PERIOD;
-    check_next_state(RX_BODY);
-    wait for CLK_PERIOD;
-    check_next_state(IDLE);
-    wait for CLK_PERIOD * 5;
-    wait for CLK_PERIOD /4;
-    check_next_state(RX_HEADER);
-    wait for CLK_PERIOD * 3 / 4;
-    expected_out <= get_cmd_bits(READ_ADD) & get_size_bits(2);
-    check_next_state(ADDR1);
-    wait for CLK_PERIOD;
-    expected_out <= x"FA";
-    check_next_state(ADDR2);
-    wait for CLK_PERIOD;
-    expected_out <= x"A0";
-    check_next_state(ADDR3);
-    wait for CLK_PERIOD;
-    expected_out <= x"0F";
-    check_next_state(ADDR4);
-    wait for CLK_PERIOD;
-    expected_out <= x"FA";
-    check_next_state(RX_RESPONSE);
-    wait for CLK_PERIOD;
-    expected_out <= "00000000";
-    check_next_state(RX_RESPONSE);
-    wait for CLK_PERIOD;
-    check_next_state(RX_BODY);
-    wait for CLK_PERIOD;
-    check_next_state(RX_BODY);
-    wait for CLK_PERIOD;
-    check_next_state(IDLE);
-    wait;
-  end process verify_signals;
-
   command_stimulus: process
   begin
-    cmd <= NO_OP;
-    cmd_size <= 2;
-    wait for 3*CLK_PERIOD;
-    wait for CLK_PERIOD / 2;
-    cmd <= WRITE;
-    wait for CLK_PERIOD;
-    cmd <= NO_OP; 
-    wait for CLK_PERIOD * 10;
-    cmd <= WRITE_ADD;
-    address <= x"FA0FA0FA";
-    wait for CLK_PERIOD;
-    cmd <= NO_OP; 
-    address <= (others => '0');
-    wait for CLK_PERIOD * 10;
-    cmd <= READ;
-    wait for CLK_PERIOD;
-    cmd <= NO_OP; 
-    wait for CLK_PERIOD * 10;
-    cmd <= READ_ADD;
-    address <= x"FA0FA0FA";
-    wait for CLK_PERIOD;
-    cmd <= NO_OP; 
-    address <= (others => '0');
+    controller_to_socbridge_driver.instruction <= NO_OP;
+    controller_to_socbridge_driver.seq_mem_access_count <= 0;
+    controller_to_socbridge_driver.request <= '0';
+    controller_to_socbridge_driver.address <= x"00000000";
+    wait until rst='0';
+    for i in 100 downto 0 loop
+      wait until rising_edge(clk);
+    end loop;
+    controller_to_socbridge_driver.instruction <= WRITE;
+    controller_to_socbridge_driver.seq_mem_access_count <= 128;
+    controller_to_socbridge_driver.address <= x"40000000";
+    wait until rising_edge(clk);
+    controller_to_socbridge_driver.request <= '1';
+    wait until socbridge_driver_to_controller.is_active = '1';
+    controller_to_socbridge_driver.request <= '0';
+    wait until socbridge_driver_to_controller.is_active = '0';
+    for i in 100 downto 0 loop
+      wait until rising_edge(clk);
+    end loop;
+    controller_to_socbridge_driver.instruction <= READ;
+    controller_to_socbridge_driver.seq_mem_access_count <= 128;
+    controller_to_socbridge_driver.address <= x"40000000";
+    wait until rising_edge(clk);
+    controller_to_socbridge_driver.request <= '1';
+    wait until socbridge_driver_to_controller.is_active = '1';
+    controller_to_socbridge_driver.request <= '0';
+    wait until socbridge_driver_to_controller.is_active = '0';
+    done := TRUE;
     wait;
   end process command_stimulus;
 
-  external_stimulus_signal: process(curr_word)
-  begin
-    ext_to_socbridge_driver.payload <= curr_word;
-    ext_to_socbridge_driver.control(0) <= calc_parity(curr_word);
-  end process external_stimulus_signal;
-
-  external_stimulus: process
-  begin
-    rst <= '0';
-    wait for CLK_PERIOD / 1000;
-    rst <= '1';
-    curr_word <= "00000000"; 
-    wait for 999 * CLK_PERIOD / 1000;
-    wait for 2 * CLK_PERIOD;
-    rst <= '0';
-    wait for CLK_PERIOD / 2;
-    wait for 4* CLK_PERIOD;
-    curr_word <= "00001001";
-    wait for CLK_PERIOD;
-    curr_word <= "00000000";
-    wait for CLK_PERIOD * 14;
-    curr_word <= "00101001";
-    wait for CLK_PERIOD;
-    curr_word <= "00000000";
-    wait for CLK_PERIOD*5;
-    curr_word <= "01000001";
-    wait for CLK_PERIOD;
-    curr_word <= "10000000";
-    wait for CLK_PERIOD;
-    curr_word <= "01000000";
-    wait for CLK_PERIOD;
-    curr_word <= "00000000";
-    wait for CLK_PERIOD*12;
-    curr_word <= "01100001";
-    wait for CLK_PERIOD;
-    curr_word <= "00100000";
-    wait for CLK_PERIOD;
-    curr_word <= "00010000";
-    wait for CLK_PERIOD;
-    curr_word <= "00000000";
-
-
-    wait;
-  end process external_stimulus;
-
   internal_stimulus: process
+    variable count : integer := 1;
   begin
-    buffer_to_socbridge_driver.is_full_in <= '0';
-    buffer_to_socbridge_driver.write_enable_out <= '0';
-    wait for 3 * CLK_PERIOD;
+    ip_to_socbridge_driver.ready <= '0';
+    ip_to_socbridge_driver.valid <= '1';
+    wait until rst = '0';
     -- stimulus goes here
-    buffer_to_socbridge_driver.write_enable_out <= '1';
-    buffer_to_socbridge_driver.payload <= "00000001";
-    wait until rising_edge(clk) and socbridge_driver_to_buffer.is_full_out = '0';
-    wait until falling_edge(clk);
-    buffer_to_socbridge_driver.payload <= "00000010";
-    wait until rising_edge(clk) and socbridge_driver_to_buffer.is_full_out = '0';
-    wait until falling_edge(clk);
-    buffer_to_socbridge_driver.payload <= "00000100";
-    wait until rising_edge(clk) and socbridge_driver_to_buffer.is_full_out = '0';
-    wait until falling_edge(clk);
-    buffer_to_socbridge_driver.payload <= "00001000";
-    wait until rising_edge(clk) and socbridge_driver_to_buffer.is_full_out = '0';
-    wait until falling_edge(clk);
-    buffer_to_socbridge_driver.payload <= "00010000";
-    wait until socbridge_driver_to_buffer.is_full_out = '0';
-    wait for CLK_PERIOD/2;
-    wait until rising_edge(clk);
-    wait until rising_edge(clk);
-    buffer_to_socbridge_driver.payload <= "00100000";
-    wait until socbridge_driver_to_buffer.is_full_out = '0';
-    wait for CLK_PERIOD/2;
-    wait until rising_edge(clk);
-    wait until rising_edge(clk); --- ??? Why all these rising_edge checks?
+
+    while not done loop
+      wait until (rising_edge(socbridge_driver_to_ext.control(1)) or falling_edge(socbridge_driver_to_ext.control(1))) and socbridge_driver_to_ip.ready = '1';
+      ip_to_socbridge_driver.data <= std_logic_vector(to_unsigned(count, 8));
+      count := count + 1;
+    end loop;
     wait;
   end process internal_stimulus;
-  
 end architecture tb ;

src/socbridge/socbridge_driver_tb_pkg.vhd

@@ -1,156 +0,0 @@
-library IEEE;
-use IEEE.std_logic_1164.all;
-use IEEE.numeric_std.all;
-use IEEE.MATH_REAL.all;
-library ganimede;
-use ganimede.io_types.all;
-
-
-package socbridge_driver_tb_pkg is
-  subtype command_size_t is integer range 0 to 128;
-
-  type command_t is 
-    (NO_OP, WRITE_ADD, WRITE, READ_ADD, READ, P_ERR);
-
-  type response_t is 
-    (NO_OP, WRITE_ACK, READ_RESPONSE);
-
-  type state_t is
-    (IDLE, ADDR1, ADDR2, ADDR3, ADDR4, 
-     TX_HEADER, TX_BODY, TX_ACK, 
-     RX_HEADER, RX_RESPONSE, RX_BODY);
-
-  --- TRANSLATOR ---
-  type translator_state_t is (IDLE, SEND, SEND_ACCEPTED, AWAIT);
-
-  type translator_state_rec_t is record
-    curr_inst : controller_to_socbridge_driver_t;
-    curr_state : translator_state_t;
-    is_first_word : std_logic;
-  end record translator_state_rec_t; 
-
-  type ext_protocol_t is record
-    data   : std_logic_vector(interface_inst.socbridge.payload_width - 1 downto 0);
-    clk    : std_logic;
-    parity : std_logic;
-  end record ext_protocol_t;
-
-  type state_rec_t is record
-    curr_state: state_t;
-    ext_to_socbridge_driver_reg, socbridge_driver_to_ext_reg : ext_protocol_t; 
-    write_stage, read_stage : NATURAL;
-    curr_cmd : command_t;
-    curr_cmd_size: integer;
-    curr_addr : std_logic_vector(31 downto 0);
-  end record state_rec_t;
-  impure function calc_parity(
-    d : STD_LOGIC_VECTOR(interface_inst.socbridge.payload_width - 1 downto 0)
-  ) return std_logic;
-  pure function create_io_type_out_from_ext_protocol(
-  input: ext_protocol_t
-  ) return socbridge_driver_to_ext_t;
-  function to_string ( a: std_logic_vector) return string;
-  pure function get_cmd_bits(command : command_t) return std_logic_vector;
-  pure function get_size_bits(size : command_size_t) return std_logic_vector;
-  pure function get_size_bits_sim(size : command_size_t) return std_logic_vector;
-  --- DEBUG GLOBAL SIGNALS ---
-  -- synthesis translate_off 
-  signal G_next_parity_out : std_logic;
-  signal G_ext_to_socbridge_driver_rec : ext_protocol_t;
-  signal G_socbridge_driver_to_ext_data_cmd : std_logic_vector(interface_inst.socbridge.payload_width - 1 downto 0);
-  signal G_next_state : state_t;
-  signal G_curr_command : command_t;
-  signal G_curr_command_bits : std_logic_vector(4 downto 0);
-  signal G_curr_response : response_t;
-  signal G_curr_response_bits : std_logic_vector(4 downto 0);
-  signal G_st : state_rec_t;
-  signal G_trans_st : translator_state_rec_t;
-  -- synthesis translate_on 
-  
-end package socbridge_driver_tb_pkg;
-
-package body socbridge_driver_tb_pkg is
-  function to_string ( a: std_logic_vector) return string is
-  variable b : string (1 to a'length) := (others => NUL);
-  variable stri : integer := 1; 
-  begin
-      for i in a'range loop
-          b(stri) := std_logic'image(a((i)))(2);
-      stri := stri+1;
-      end loop;
-  return b;
-  end function;
-  
-  impure function calc_parity(
-    d : STD_LOGIC_VECTOR(interface_inst.socbridge.payload_width - 1 downto 0)
-  ) return std_logic is
-  variable parity : std_logic;
-  begin
-    parity := d(0);
-    for x in integer'(1) to d'length - 1 loop
-      parity := parity xor d(x);
-    end loop;
-    return not parity;
-  end function;
-
-  
-  
-  pure function create_io_type_out_from_ext_protocol(
-    input : ext_protocol_t
-  ) return socbridge_driver_to_ext_t is
-  variable val : socbridge_driver_to_ext_t;
-  begin
-    val.payload:= input.data;
-    val.control(1) := input.clk;
-    val.control(0) := input.parity;
-    return val;
-  end function;
-  pure function get_cmd_bits(command : command_t) 
-    return std_logic_vector is
-  variable val : std_logic_vector(4 downto 0);
-  begin
-    with command select
-      val := "00000" when NO_OP,
-             "10000" when WRITE_ADD,
-             "10100" when WRITE,
-             "11000" when READ_ADD,
-             "11100" when READ,
-             "01001" when P_ERR,      
-             "11111" when others;   
-    return val;
-  end function;
-  
-  
-  pure function get_size_bits(size: command_size_t) 
-    return std_logic_vector is
-  variable val : std_logic_vector(2 downto 0);
-  begin
-    if size > 2**6 then
-      val := "111";
-    elsif size > 2**5 then
-      val := "110";
-    elsif size > 2**4 then
-      val := "101";
-    elsif size > 2**3 then
-      val := "100";
-    elsif size > 2**2 then
-      val := "011";
-    elsif size > 2**1 then
-      val := "010";
-    elsif size > 2**0 then
-      val := "001";
-    elsif size >= 0 then
-      val := "000";
-    end if;
-    return val;
-  end function;
-  pure function get_size_bits_sim(size: command_size_t) 
-    return std_logic_vector is
-  variable pow : integer;
-  variable val : std_logic_vector(2 downto 0);
-  begin
-    pow := integer(CEIL(sqrt(Real(size))));
-    val := std_logic_vector(TO_UNSIGNED(size - 1, 3));
-    return val;
-  end function;
-end package body socbridge_driver_tb_pkg;

src/software/simple_test.c

@@ -0,0 +1,130 @@
+#include <stdint.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include <sys/types.h>
+
+#define debug(format, ...) printf("DEBUG - " format "\n",##__VA_ARGS__)
+
+volatile u_int32_t ganimede_read_data[1024] __attribute__ ((aligned (1024)));
+volatile u_int32_t ganimede_write_data[1024] __attribute__ ((aligned (1024)));
+
+const uint32_t size_bias = 10;
+
+enum OpType{ WRITE_ONE_SHOT, WRITE_LOOP, READ_ONE_SHOT, READ_LOOP };
+int ceil_log2(unsigned long long x)
+{
+  static const unsigned long long t[6] = {
+    0xFFFFFFFF00000000ull,
+    0x00000000FFFF0000ull,
+    0x000000000000FF00ull,
+    0x00000000000000F0ull,
+    0x000000000000000Cull,
+    0x0000000000000002ull
+  };
+
+  int y = (((x & (x - 1)) == 0) ? 0 : 1);
+  int j = 32;
+  int i;
+
+  for (i = 0; i < 6; i++) {
+    int k = (((x & t[i]) == 0) ? 0 : j);
+    y += k;
+    x >>= k;
+    j >>= 1;
+  }
+
+  return y;
+}
+// Address will forcibly floored to be aligned to KB.
+// byteSize must be smaller than 
+u_int32_t create_ganimede_instruction(u_int32_t address, enum OpType optype, u_int32_t byteSize){
+  u_int32_t addressPart = (address & 0xfffffc00);
+  u_int32_t optypePart = 0x00000000;
+  u_int32_t byteSizePart = 0;
+
+  byteSize = byteSize > 1 << 25? 1<<25 :byteSize;
+  byteSizePart = ceil_log2(byteSize) - size_bias;
+  byteSizePart = (byteSizePart & 0xf) << 6;
+  switch (optype) {
+    case WRITE_ONE_SHOT: optypePart |= 0b001000; break;
+    case WRITE_LOOP:     optypePart |= 0b011000; break;
+    case READ_ONE_SHOT:  optypePart |= 0b000000; break;
+    case READ_LOOP:      optypePart |= 0b010000; break;
+  }
+  return addressPart | optypePart | byteSizePart;
+}
+
+char* show_optype(u_int32_t optype){
+  switch ((optype & 0b111000) >> 3)  {
+    case 0b001: return "WRITE_ONE_SHOT"; break;
+    case 0b011: return "WRITE_LOOP"; break;
+    case 0b000: return "READ_ONE_SHOT"; break;
+    case 0b010: return "READ_LOOP"; break;
+  }
+  return "UNKNOWN";
+}
+
+void print_gan_inst(u_int32_t inst){
+  int size = ((inst & 0b1111000000) >> 6) + size_bias;
+  if (size >= 30){
+    debug(        "command vector is |    address: %#011x\n"
+          "                          |  operation: %s\n" 
+          "                          |       size: %d MB\n"
+          , inst & 0xfffffc00, show_optype(inst), 1 << (size - 30));
+  } else if (size >= 20){
+    debug(        "command vector is |    address: %#011x\n"
+          "                          |  operation: %s\n" 
+          "                          |       size: %d MB\n"
+          , inst & 0xfffffc00, show_optype(inst), 1 << (size - 20));
+  } else if(size >= 10){
+    debug(        "command vector is |    address: %#011x\n"
+          "                          |  operation: %s\n" 
+          "                          |       size: %d KB\n"
+          , inst & 0xfffffc00, show_optype(inst), 1 << (size - 10));
+  } else {
+    debug(        "command vector is |    address: %#011x\n"
+          "                          |  operation: %s\n" 
+          "                          |       size: %d B\n"
+          , inst & 0xfffffc00, show_optype(inst), 1 << size);
+  }
+}
+
+int main(){
+  volatile u_int32_t* data_ptr = (u_int32_t*) 0x10000000;
+  volatile u_int32_t* cfg_ptr = (u_int32_t*) 0x80000d00;
+  //for(int i = 0; i < 10; i++){
+  //  ((int*) (0x80000000))[i] = 0x12345678 + i;
+  //}
+  printf("\n");
+  debug("Initializing socbridge and GANIMEDE");
+  debug("setting socbridge config");
+  // Setting omaxsz = 7 and orxqen = true
+  cfg_ptr[0] = 0x0001bfff;
+  cfg_ptr[1] = 0x00000000;
+  debug("setting parif config.");
+  cfg_ptr[4] = 0x00000071;
+  cfg_ptr[5] = 0x00001002;
+
+  debug("initializing test data to read");
+  for(int i = 0; i < sizeof(ganimede_read_data)/sizeof(u_int32_t); i++){
+    ganimede_read_data[i] = i;
+  }
+
+  debug("Finished initializing\n");
+
+
+
+  debug("Sending commands to GANIMEDE");
+  debug("creating and sending a read instruction");
+  int readInst = create_ganimede_instruction((u_int32_t) &ganimede_read_data[0], READ_ONE_SHOT, 1024 );
+  print_gan_inst(readInst);
+  //data_ptr[0] = readInst;
+
+  debug("creating and sending a write instruction");
+  int writeInst = create_ganimede_instruction((u_int32_t) &ganimede_write_data[0], WRITE_ONE_SHOT, 1024);
+  print_gan_inst(writeInst);
+  //data_ptr[1] = writeInst;
+
+  debug("Finished sending commands\n");
+  return 0;
+}

src/vhdl_ls.toml

@@ -2,16 +2,34 @@
 standard = "1993"
 # File names are either absolute or relative to the parent folder of the vhdl_ls.toml file
 [libraries]
-ganimede.files = [
-    'ganimede/io_type_pkg.vhd'
+gan_ganimede.files = [
+    'ganimede/io_type_pkg.vhd',
+    'ganimede/ganimede.vhd'
 ]
-socbridge.files = [
+gan_socbridge.files = [
     'socbridge/*.vhd'
 ]
-
-controller.files = [
+gan_dummy_ip.files = [
+    'dummy_ip/*.vhd'
+]
+gan_controller.files = [
     'controller/*.vhd',
 ]
+gan_manager.files = [
+    'manager/*.vhd',
+]
+gan_buffer.files = [
+    'fifo_buffer/*.vhd',
+]
+grlib.files = [
+   'grlib-com-nx-2024.4-b4295/lib/grlib/**/*.vhd',
+]
+techmap.files = [
+   'grlib-com-nx-2024.4-b4295/lib/techmap/**/*.vhd',
+]
+gaisler.files = [
+   'grlib-com-nx-2024.4-b4295/lib/gaisler/**/*.vhd',
+]
 
 [lint]
 unused = 'error' # Upgrade the 'unused' diagnostic to the 'error' severity